TOP Sabre FD 專區

Just want to have a place to share the settings and experience on playing Sabre FD~
Welcome to post any things related to the Sabre FD, even settings, photo, related websites anything~!

                               
登錄/註冊後可看大圖

Support TOP
師兄係邊度玩多

小弟都入左架 SABRE，不過仲未完成

Let me share some experience on the Sabre FD.  I am a beginner on front wheel car.
Today just try it on JV track, bascially followed the most settings on the setup sheet from TOP. The details are:

Camber : F & R are 2 degree
Toe : F  toe in 1 degree, R default
Dampers spring : original one
Dampers oil : F35 R30
Downstop : F and R are 3mm
Ride height : F 4.5mm R 5.5mm
Motor : SpeedPassion competition 13.5RPinion gear : 18T
ESC : Hobbywing 120A with turbo mode
Tire : 36R

When I decrease the throttle while go into 灣, the car will "Nut"尾 at the 灣尾.  反而when the speed is high and go into and leave the 灣 , with the low turning angle, the car can smooth to go.

Sometime when i try to accelerate a bit during cornering, the car will easy to cup 4.

So generally i think that i still need time to set up the car correctly for JV, but the feeling is good when the car is cornering on some low speed  灣 because the car cornering response is fast, or too fast.

Support TOP
師兄係邊度玩多

小弟都入左架 SABRE，不過仲未完成
利物浦 發表於 2010-9-26 18:00

                               
登錄/註冊後可看大圖

I just tried the car on JV today only!

齒比幾多 ?

齒比幾多 ?
利物浦 發表於 2010-9-26 21:27

                               
登錄/註冊後可看大圖

Forget to say i was using 18T.
Gear ratio is 6.44

想請問 TOP Sabre FD 頭和尾彈弓的磅數是什麽呢?? Thanks!

想請問 TOP Sabre FD 頭和尾彈弓的磅數是什呢?? Thanks!
Chrispo 發表於 2010-9-26 21:55

                               
登錄/註冊後可看大圖

跟車果 set 彈弓係
頭 344 = 19.2 lb
尾 306 = 17.1 lb

跟車果 set 彈弓係
頭 344 = 19.2 lb
尾 306 = 17.1 lb
利物浦 發表於 2010-9-26 21:59

                               
登錄/註冊後可看大圖

thank you for your information

跟車果 set 彈弓係
頭 344 = 19.2 lb
尾 306 = 17.1 lb
利物浦 發表於 2010-9-26 21:59

                               
登錄/註冊後可看大圖

Thanks a lot!!!

C Hing Powis, do you mean 灣尾 as corner exit?

"when the speed is high and go into and leave the 灣 , with the low turning angle, the car can smooth to go." ... Are you referring to going around big corners? Thanks in advance!

順便俾埋 TOP 其他果 d 彈弓 lb 大家參考

393 = 22
367 = 20.5
344 = 19.2
324 = 18.1
306 = 17.1
289 = 16.2

通常係用上述果 d
另外其實仲有 626,591,560,532,507 等等
大約由 28 - 33 lb，綿呔版的 PHOTON 就會跟 lb 較大的彈弓

C Hing Powis, do you mean 灣尾 as corner exit?

"when the speed is high and go into and leave the ...
Chrispo 發表於 2010-9-26 22:08

                               
登錄/註冊後可看大圖

Yup, i means the corner exit.

Yup too, actually i was talking about the corner after the long straight road in JV.  i found that i full speed enter and exit the corner with the minimum turning  angle is easier to control.

13.5T use around 20T

13.5T use around 20T
LeoChan 發表於 2010-9-26 22:43

                               
登錄/註冊後可看大圖

Will that be a bit too fast?

Meanwhile, if using the TOP gear diff, what degree of diff. gear oil/grease would you recommend?

Thanks!

Will that be a bit too fast?

Meanwhile, if using the TOP gear diff, what degree of diff. gear ...
Chrispo 發表於 2010-9-26 23:02

                               
登錄/註冊後可看大圖

But i heard that TOP gear diff is very easy to damage...anybody tried this ?

Oo.... first time to ride a TOP car! Haven't heard of that

回復 16# powis

i once heard that the gear diff. of top sabre is same as tamiya's m03.  
but i am not sure whether it is true.

But i heard that TOP gear diff is very easy to damage...anybody tried this ?
powis 發表於 2010-9-26 23:10

                               
登錄/註冊後可看大圖

玩頭驅未聽聞過掂唔掂
只聽聞玩 touring 4.5t 較易掃

回復  powis

i once heard that the gear diff. of top sabre is same as tamiya's m03.  
but i am n ...
1524 發表於 2010-9-26 23:28

                               
登錄/註冊後可看大圖

I heard that the gear diff for Photon also can be used on Sabre (from one of the shop in KWS), but also heard that gear diff is very weak and easy to damage...