TOP Sabre FD 專區

Though I was thinking of changing to gear diff. It seems like I better stick with the ball diff.

Forget to say i was using 18T.
Gear ratio is 6.44
powis 發表於 2010-9-26 21:53

                               
登錄/註冊後可看大圖

    C兄,我想請問你有冇個TUBRO SETTING 呀?我都係玩呢部KA ,有機會一起玩啦!!

C兄,我想請問你有冇個TUBRO SETTING 呀?我都係玩呢部KA ,有機會一起玩啦!!
ae110hk 發表於 2010-9-27 03:53

                               
登錄/註冊後可看大圖

I have forgot the exact setting right now, just remember i use the max turbo level and timing, and the turbo delay is 0.1 and it will start at 6000rpm.

Today tried some set up tips from "high hand" and found that using the lower traction tire at front which can really help the car stability and my car now much less "nut" now!

BTW anyone know TOP have released the spool diff for Sabre FD? or need to modify it myself from the ball diff (even i think it is not hard to do)?

回復 24# powis

頭用 lower tracion tyre....唔會令架車更傾各甩頭 (入唔到灣咩)?
不過你講高手set 過....一定仲有其他"秘技"o既

回復  powis

頭用 lower tracion tyre....唔會令架車更傾各甩頭 (入唔到灣咩)?
不過你講高手set 過. ...
1524 發表於 2010-10-2 09:31

                               
登錄/註冊後可看大圖

I also have same feel at the beginning when i heard that idea, but after try this, it really run much better.  I just bought some cheap price tire like (Swxxp or Solaxxx).

回復  powis

頭用 lower tracion tyre....唔會令架車更傾各甩頭 (入唔到灣咩)?
不過你講高手set 過. ...
1524 發表於 2/10/2010 09:31 AM

                               
登錄/註冊後可看大圖

甩頭咩黎? 推頭甩尾我就聽過....
24#樓講緊係頭用無襟咬既tire 車尾會無襟甩, 係其中一個解決甩尾既方法

回復 28# lung1

用個"甩"字o黎玩食字o者
其實係想講推頭.
我都諗緊, "推頭"些少, 係唔係可以有助減少"甩尾".  

今日試左車  ,唔知點解 FF車會甩尾,仲甩得好勁 一入彎就調頭  要就住就住先玩到 但架車入彎反應同速度都好快
我用SO 力屎36R    大家有咩解決方法

回復 30# rcmodel


    解決方法...落呔水 very good..

咬到  "及"車  仲用TIRE水?????
我係GDV  一出直路 比油,即反車   直路尾  轉入去,又反

回復 32# rcmodel


   你話..甩尾,仲甩得好勁 ????又咬到  "及"車  ..咁係..甩尾定及"車??
  我都係玩FF..甩尾咪試吓落車尾 TIRE水....及"車咪試吓 車高 同 避震擺位..係我見意>

今日試左車  ,唔知點解 FF車會甩尾,仲甩得好勁 一入彎就調頭  要就住就住先玩到 但架車入彎反應同速度都好快 ...
rcmodel 發表於 2010-10-3 23:08

                               
登錄/註冊後可看大圖

both front and rear use Sorex 36R ?

係我講得不清楚  我架車係又調頭,又反車

試下尾呔比頭呔低 10 度，同埋依家 D 溫度，日頭玩頭用 40 度，收太陽後用 36 度差不多

呢部車唔可以用 Sorex o太,要用 cheap 野.個頭避震要校硬 d,頭 2 度尾 1 度 camber.尾要林,車尾落 20G 鉛,用既殼一定要有大翼咁先叫玩到.

呢部車唔可以用 Sorex o太,要用 cheap 野.個頭避震要校硬 d,頭 2 度尾 1 度 camber.尾要林,車尾落 20G 鉛,用 ...
TODA 發表於 2010-10-4 17:13

                               
登錄/註冊後可看大圖

    車尾落鉛起步咪好慢-_-

回復 29# 1524

推頭 = Understeer (Grip at Rear > Grip at Front)
甩尾 = Oversteer (Grip at Front > Grip at Rear)
They are opposite to each other. So, increase/decrease one factor must decrease/increase the opposite factor.
Reference from: Hudy/Xray Set-up manual.

回復 40# singlau714

thanks!
x ray manuel真係好似好多o野學.
要搵日認真睇o下先