my f109 ... finished

my f109....
完成了大部份.....感覺幾好....如果以價錢和質量來比較, 對我來說....有90分了
加上是香港製造....所以很滿意
但是還有改善空間的....某些膠料可用一些較硬材料...相信會好一點

did you put it to the track yet ?

i still not finish ar.....still finding cheap low profile servo..

3# abcde

finally ....i bought a cheap low profile servo from rcmart....but due to it little bit longer..so need small modify
then...i need think which colour of my f109 paint and where find decal

no la.....not finish the body yet...

Hi Bro,
this F109 wheel base is same as F103??
you can use F103 body to run first.

f109 係最新?

my 109 also almost finish, now need to paint the shell.
Only use TPESC and fan black pig, try run in football court, very funny wor, speed fast enough for fun, not bad....running very quite. But the spur gear very noisy when reverse run, don't know why ?? ching have any idea ?????

登錄/註冊後可看大圖

想問下...F109個LOOK
O岩做咩車隊或者咩車花??

個TPESC咁大...裝吾裝到車殼呀=0=

finally ...finish and can test.....
use GWS low profile servo
hobby wing 35A ESC
3000KV motor...gear 98/19
small modify to fit the old body..(due to new one still not paint)

13# abcde
yesterday...test run in wan chai....due to use 3racing org tire...not underbridge ghost tire or tamyia C type tire....so very hard to control....also find out the must change parts..the rear is too soft...the side spring is too soft ...almost nothing...so change spring i think is a must....
next time will use tamyia c type tire and hope to have a better control....

test report again
yesterday go to wan chai test again, using tamyia C type tire with a better control under the bridge.....however...after one battery....the car suddenly stop....after check....the low profile GWS servo broken....don't know why when plug in ...all the electric don' work....when remove the 3 wire plug...the ESC and receiver resume normal...my comment is....DON'T BUY GWS again....but i can't find any cheap low profile servo.....the servo only play 2 time and with 3 battery....sign.....
about the f109...after using a more hard rear side spring...the 回中 become better and the car control is simlar as f103 but with a longer chassic....

Hi Bro,
我"橙"過你, 我燒咗隻hitech 5945MG成4xx架.
裝咗上1/5 F1 向屋企試過一次就死咗.
前日問永利有冇得維修, 原來已經停產咗冇得整....唉

what reason burn servo ? I only use cheap cheap Towerpro MG995 on F109 and played more than 15 packs battery, no problem wor.....

MG995 out of stock!

17# gimsink
i don't know la....just change back use 3003...will test again later....

16# fyin
sign...burn a $4xx servo really too bad
i don't know bought another low profile or just cut ear and not use those blue screw ...

test today again in wan chai....use 3003 servo and finally finish all my 4 pack battery
the org 98t xeron spur finish his life today...and i just have a 106t 64 pitch kawada...then..106/21....hobby wind 35A 3000kv...the control better then before...it may be more soft startup in the slipper track is better then rocket speed..
about the f109..it more like my old f103 control...although it longer then f103..but still good ...the front arm...i think i will change back to tamyia....and i almost finish my body la...

22# abcde
body photo....now need make the head....