RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

 找回密碼
 新玩家註冊
搜索
樓主: abcde
打印 上一主題 下一主題
收起左側

my f109 ... finished

[複製鏈接]
21#
 樓主| abcde 發表於 2009-10-13 22:18:51 | 只看該作者
23# abcde

i am my friend will play f1 on coming sunday PM in wanchai underbridge...other wanchai fans who have f1..pls join us have fun... ...i sure...more car ...more fun
22#
gimsink 發表於 2009-10-14 09:55:49 | 只看該作者
abcde-san, have you seen my lap-sap shell in the other post ? really heven and hell....
23#
 樓主| abcde 發表於 2009-10-14 10:02:08 | 只看該作者
25# gimsink
yours also not bad ar...see full (though) ma....
if have time...play at wan chai on sunday afternoon ar....but need use tamyia C type tire or underbridge ghost tire....org 3racing tire can't run at there....
24#
 樓主| abcde 發表於 2009-10-21 16:38:49 | 只看該作者
25#
amzta14797 發表於 2009-10-21 16:49:08 | 只看該作者
MG 995 係極x 隔離個間野好似有(好多)
26#
 樓主| abcde 發表於 2009-10-21 18:46:03 | 只看該作者
28# amzta14797


sigh....the body hole and the body cutting is not fit...why 3racing f1 body..not fit the 3racing f1...i think they really need to improve and make one before selling out...
27#
super645n67 發表於 2009-10-22 19:09:58 | 只看該作者
very good yollow color
28#
 樓主| abcde 發表於 2009-10-23 12:46:28 | 只看該作者
31# 3rock

thx....will play on sunday ?
29#
fyin 發表於 2009-10-23 16:38:17 | 只看該作者
Hi Bro,
Very Very Good work in F1 body wor.
30#
 樓主| abcde 發表於 2009-10-23 20:14:25 | 只看該作者
when will you come back to play RC ar....buy hpi ften la...it cheap and good run ...and have good look body....and you can use your f201 form tire.....
31#
chiwingedwinlo 發表於 2009-10-23 22:04:24 | 只看該作者
abcde c-hing, which type/brand of rear side spring you chose for replacement ?
32#
 樓主| abcde 發表於 2009-10-24 00:31:52 | 只看該作者
本帖最後由 abcde 於 2009-10-24 00:33 編輯

I just cut some old spring at home..will wait 3racing option for test but still not in market yet
33#
 樓主| abcde 發表於 2009-10-26 13:15:01 | 只看該作者
test yesterday....finally play it with 3racing f1 body and 3racing f1 chassic....
the handling is good ....i just replace the front arm to tamyia because the org one really "............." hope 3racing can improve the design of their A arm...also thank 3rock help me to adjust the gear because i alway lose the gear....
the overall performance is good ...now need to find the 31mm king ping for the tamyia fix A arm and better gear ratio for playing at wanchai...
i use hobbywing 35a esc with 13T 3000kv motor...gear 104/23 BY energy lipo 25c 3500mah
34#
 樓主| abcde 發表於 2009-11-2 22:46:39 | 只看該作者
me and my friend will play f1 on coming friday in wanchai underbridge, hope other ching can join us have fun....we now have f109, f104,techf108, hope to see f103,hpif10 other type f1 play
date : 6/11/09
time :7:30pm
need: underbridge ghost tire for f1 or tamyia type C f1 tire (due to track of wanchai underbridge)
Also welcome other 2wd like 1/12, pro10...or f103GT....
35#
fyin 發表於 2009-11-3 09:37:39 | 只看該作者
OK, I can come, how about 3 rock & James??
36#
 樓主| abcde 發表於 2009-11-3 13:17:27 | 只看該作者
40# fyin
i don't know james ar....i just send sms to everyone....hear he go to shanghai ...don't know come back or not...
you play f201 or f102 ?
37#
chiwingedwinlo 發表於 2009-11-3 14:49:12 | 只看該作者
13# abcde
yesterday...test run in wan chai....due to use 3racing org tire...not underbridge ghost tire or tamyia C type tire....so very hard to control....also find out the must change parts..the r ...
abcde 發表於 2009-10-3 01:25

C-hing, where can buy the optioned spring for side rear ?
38#
 樓主| abcde 發表於 2009-11-3 20:10:22 | 只看該作者
43# chiwingedwinlo
i don't know it can buy on market or not......read 3racing web site it still say coming soon......if it release...i think most have 3racing -part shop can buy.....
39#
bigheman 發表於 2009-11-12 11:58:48 | 只看該作者
Great report!! Am going to get F109 very soon!!! Can it use standard size servo?
40#
bigheman 發表於 2009-11-12 12:00:35 | 只看該作者
Hi Ching, also I like the LED at the back of the car, I remember Tamiya use to make a break like kit, which I used to have on my veyr old F103. Can we still buy them??

Cheers!!
您需要登錄後才可以回帖 登錄 | 新玩家註冊

本版積分規則

手機版|小黑屋|RC EVOLUTION - 遙控工房

GMT+8, 2024-4-30 15:15 , Processed in 0.042476 second(s), 17 queries , Gzip On.

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回復 返回頂部 返回列表