RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

 找回密碼
 新玩家註冊
搜索
查看: 2593|回復: 18
打印 上一主題 下一主題
收起左側

新手撻唔到車

[複製鏈接]
跳轉到指定樓層
1#
chak718 發表於 2008-10-22 20:28:15 | 只看該作者 回帖獎勵 |倒序瀏覽 |閱讀模式

遊客登錄

您需要 登錄 才可以下載或查看,沒有帳號?新玩家註冊

x
各c hing,小弟剛剛換了一副os 12tz...小弟原本玩開s3的!!現改了電撻!!小弟並不識怎樣撻車!!有c hing可以幫我ma?小弟住北區的!!唔該晒!!

[ 本帖最後由 chak718 於 2008-10-22 20:32 編輯 ]
2#
 樓主| chak718 發表於 2008-10-22 20:31:42 | 只看該作者
3#
 樓主| chak718 發表於 2008-10-22 21:19:35 | 只看該作者
有大女hing幫到手1呀?thx
4#
 樓主| chak718 發表於 2008-10-22 21:20:15 | 只看該作者
有冇c hing 幫到手呀?thx
5#
defcone 發表於 2008-10-22 21:21:53 | 只看該作者
Starter boxes

Starter boxes are great for racing. These are used to start non starter engines. This type of engine has no starter assembly to drag on the crankshaft, and give a very tiny performance increase. They have a wheel that sticks out from the top of the box. You sit the vehicle on it, push down, and this activates a switch which makes the wheel start spinning, and makes the flywheel contact the starter box wheel. The engine will eventually start. A starterbox will only work on an RC with a flywheel access slot on the bottom of the chassis. This means, basically every RC but a standard monster truck.
Starterboxes have small adjustable tabs that align the vehicle to allow for quick, effortless starting. The position of these tabs will be different for every model, so don't plan on starting your GS Storm SUT truggy on the same 'box as your Losi XXX-NT. There are also different sizes, named by the scale they are for. It will be nearly impossible to start a 1/8 scale buggy on a 1/10 scale starter box, but the current authors are not sure that a 1/10 cannot be started on a 1/8 starterbox.
You can power a starterbox on either a standard 12 volt gel cell battery, or two 7.2 volt nicd/nimh stick batteries. The gel cell works well, the nicd/nimh will cause many problems, including being drained rapidly, usually when you need it the most.
Inexpensive starter boxes should always be avoided. Some of these cannot be fitted with a standard 12 volt gel cell battery, and roquire a weaker two 7.2 volt nicd/timh setup. They are usually plastic, which causes durability issues, while any good starter box has a metal case. The starter wheel can also be made of the wrong compound of rubber, causing very rapid wear.
Some starter boxes have cool extra features, but they aren't always useful. These include magnetic strips to hold body clips, and jacks to hook a glow plug clip into, which will ignite the glowplug with the same battery as the starter.

擺架車係個撻箱上面, 然後成架車按落去, 撻箱上面個"look"會開始轉, 然後個engine就自自然撻著.

[ 本帖最後由 defcone 於 2008-10-22 21:23 編輯 ]
6#
 樓主| chak718 發表於 2008-10-22 21:29:58 | 只看該作者
我今日look左好耐都唔著呀!!
7#
 樓主| chak718 發表於 2008-10-22 21:31:04 | 只看該作者
look到成副engine都係油.....
8#
zy_cf 發表於 2008-10-22 22:58:44 | 只看該作者
副engine未调好.
9#
explorer_lun 發表於 2008-10-22 23:27:52 | 只看該作者
你住北區邊度呀?
我都係北區喎~
10#
RX78amuroray 發表於 2008-10-23 01:20:53 | 只看該作者
go to PYC la
11#
boxingjoe 發表於 2008-10-23 08:36:55 | 只看該作者
如果明晚九龍灣有局, 落九龍灣搵d師兄幫手啦, 同埋除左撻箱, 我有買多個流手搥, 用來run新機唔怕會lock死. 如果明天有局我有可能去.
12#
billychan 發表於 2008-10-23 15:19:32 | 只看該作者
火咀着唔着?
13#
 樓主| chak718 發表於 2008-10-23 22:07:56 | 只看該作者

回復 10# 的帖子

pyc?但我架車玩唔到呀!!去都冇用
14#
 樓主| chak718 發表於 2008-10-23 22:08:33 | 只看該作者
15#
 樓主| chak718 發表於 2008-10-23 22:09:08 | 只看該作者
原帖由 boxingjoe 於 2008-10-23 08:36 發表
如果明晚九龍灣有局, 落九龍灣搵d師兄幫手啦, 同埋除左撻箱, 我有買多個流手搥, 用來run新機唔怕會lock死. 如果明天有局我有可能去.


c hing我住上水架!!
16#
chacha 發表於 2008-10-24 08:17:16 | 只看該作者
原帖由 chak718 於 2008-10-23 22:07 發表
pyc?但我架車玩唔到呀!!去都冇用

師兄 ga 意思係,帶哂 D 野去 PYC 搵其他師兄幫手
17#
 樓主| chak718 發表於 2008-10-24 16:42:06 | 只看該作者
原帖由 RX78amuroray 於 2008-10-23 01:20 發表
go to PYC la


c hing你幾時去呀?不如約埋小弟!!教下小弟丫~~thx 第一次玩乜都唔識!!
18#
ken1720 發表於 2008-10-24 18:39:09 | 只看該作者

回復 1# 的帖子

入ACO場主華哥,包撻得!
19#
bboy 發表於 2008-10-29 23:57:20 | 只看該作者
I heard ACO 華哥 can help run new engine. Is this true? How much?

Thanks.
您需要登錄後才可以回帖 登錄 | 新玩家註冊

本版積分規則

手機版|小黑屋|RC EVOLUTION - 遙控工房

GMT+8, 2024-4-29 06:11 , Processed in 0.166444 second(s), 18 queries , Gzip On.

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回復 返回頂部 返回列表