引擎唔知有冇壞...

問題已解決!thx~

[ 本帖最後由 explorer_lun 於 2008-11-19 03:25 編輯 ]

all possible bor.....................

examine the 膠喉 are physically  not damaged and attached properly.

make sure the oil tank cover is closed tightly, and the tank didn't crack.

try to rotate the flywheel by your bare hand, if it is hard to do so (as usual), that means the compression is still present, that means at least the engine chassis didn't crack ( I experienced before).

hopefully this helps