RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

 找回密碼
 新玩家註冊
搜索
查看: 1574|回復: 5
收起左側

NT-1 Clutch problem

[複製鏈接]
donaldt 發表於 2008-9-3 19:48:49 | 顯示全部樓層 |閱讀模式

遊客登錄

您需要 登錄 才可以下載或查看,沒有帳號?新玩家註冊

x
Hello
My NT-1 (yellow clutch) revs to very high before the clutch even engage
and it almost has no low rec...
is it time for a new clutch or is it a setting problem?

Thanks!!!
stanley_wwy 發表於 2008-9-3 20:58:04 | 顯示全部樓層

回復 1# 的帖子

is the clutch spring preload too high?
 樓主| donaldt 發表於 2008-9-3 21:13:49 | 顯示全部樓層
do i need to take the whole clutch out and re-install?
i bought it used and re-assembled the whole car
i followed the manual and set the clutch bell to have some space(manual says 0.9mm but i couldnt measure)

does the 2-speed clutch have anything to do with this problem?
cos i might have let it too loose...
stanley_wwy 發表於 2008-9-4 10:25:14 | 顯示全部樓層

回復 3# 的帖子

seems like you need to find a c hing close to you to help you set the clutch once and learn learn......

where do you live ar? see any c hing can help....
 樓主| donaldt 發表於 2008-9-5 02:25:02 | 顯示全部樓層


Thanks C Hing
went to study the menu and I think I understand the idea now
got a red clutch and some shim, the clutch bell space is minimized now(i think about 0.1mm..)
and i reseted the preload of the spring to about 2 turns and will start it there...
will test it this wekeend

and I want to know is the sound of Nova Turbo Engine different than usual engine?
because my engine seems to have a very high tone
but the compression is not bad( a bit hard to turn the flywheel with fingers)
is there a problem??
stanley_wwy 發表於 2008-9-5 12:29:02 | 顯示全部樓層

回復 5# 的帖子

高音咪堅囉...

正常高轉果時係高音架喎..
您需要登錄後才可以回帖 登錄 | 新玩家註冊

本版積分規則

手機版|小黑屋|RC EVOLUTION - 遙控工房

GMT+8, 2024-3-29 10:19 , Processed in 0.061647 second(s), 16 queries , Gzip On.

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回復 返回頂部 返回列表