RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

 找回密碼
 新玩家註冊
搜索
查看: 1614|回復: 7
收起左側

Li-Po Receiver Battery

[複製鏈接]
shky388 發表於 2008-7-8 19:42:13 | 顯示全部樓層 |閱讀模式

遊客登錄

您需要 登錄 才可以下載或查看,沒有帳號?新玩家註冊

x
Can a normal TLP charger (Ni-Cd & Ni-Mh) charge Li-Po receiver battery, if yes, how many amp should i charge???? Or do I need special charger???
馮馮ymc 發表於 2008-7-8 21:22:08 | 顯示全部樓層
曾經有位朋友用普通义機义鋰電燒咗間廠
havenlau 發表於 2008-7-8 21:33:12 | 顯示全部樓層
我都叉過,我好采, 只系舊鋰電漲左, 攪到部叉機都壞埋  , 我問hobby hobby, 原來會爆..
havenlau 發表於 2008-7-8 21:33:54 | 顯示全部樓層
you need a li-po charger
馮馮ymc 發表於 2008-7-8 21:39:27 | 顯示全部樓層
 樓主| shky388 發表於 2008-7-8 23:03:17 | 顯示全部樓層
TLP.jpg Here is what I use, a TLP charger and a Kingpwer 1650mah receiver pack. On the battery pack, it reads "King Power Li-Po batteries build in voltage protector and balance charge circuit"

I have charged the batteries two times already and it cuts off automaically after fully charged and the battery works well, no expansion nor explosion, does it imply I can continue to charge it by by TLP charger??
ktp11542 發表於 2008-7-9 09:38:54 | 顯示全部樓層
去二手區收個E-sky   li-po charger好過la ,receiver又唔洗理佢夠唔夠爆,我$50放一個比你la
唔好再搞d危險動作la,顧下你家人安全,除時你唔止燒左自己間home,你仲要累鄰居訓天橋底

[ 本帖最後由 ktp11542 於 2008-7-9 09:43 編輯 ]
havenlau 發表於 2008-7-14 10:13:42 | 顯示全部樓層
原帖由 馮馮ymc 於 2008-7-8 21:39 發表

你义邊隻鋰電??


我差YeahRacing 3000mah 25c 你電
您需要登錄後才可以回帖 登錄 | 新玩家註冊

本版積分規則

手機版|小黑屋|RC EVOLUTION - 遙控工房

GMT+8, 2024-3-28 21:17 , Processed in 0.036477 second(s), 19 queries , Gzip On.

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回復 返回頂部 返回列表