Do you remember a theory of Expansion and Contraction? Heat and cold make metals expand and contract.
Use the oven, sacrifice the bearing with the shield. Put the new bearings in the freezer. Set the oven for 350-400 and let it heat up for about 10-15 minutes. Take it out with an oven mit and lightly tap the case on a block of soft wood. They should fall out. Meanwhile the new bearings should be almost frozen now in the freezer. They will fall into the case with it being hot and the new bearings cold. Let it sit and get to room temperature. – This method does not apply to unscrew those screws in your engine as they will expand as well with the crankcase.You may consider heating the surrounding of the crankcase with a heat gun for a while and try to unscrew hexagon screws.
Do you remember a theory of Expansion and Contraction? Heat and cold make metals expand and contract.
Use the oven, sacrifice the bearing with the shield. Put the new bearings in the freezer. Set ...
No. This method applies for removing the bearing from crankcase. This method does not apply to unscrew those screws in your engine as they will expand as well with the crankcase.You may consider heating the surrounding of the crankcase with a heat gun for a while and try to unscrew hexagon screws.