Servo點解有雜音

http://www.youtube.com/watch?v=GwsqCm6Eo_M
點解有雜音ga??正吾正常??
(要用耳筒先聽到)

原帖由 fz7327 於 2008-5-1 18:16 發表

                               
登錄/註冊後可看大圖

http://www.youtube.com/watch?v=GwsqCm6Eo_M
點解有雜音ga??正吾正常??
(要用耳筒先聽到)

冇,佢喺道打緊波斯密碼姐,當然要用耳筒先聽到喇

波斯密碼??真ga??

原帖由 笨仔 於 2008-5-1 20:35 發表

                               
登錄/註冊後可看大圖

冇,佢道打緊波斯密碼姐,當然要用耳筒先聽到喇

哈哈~~笨師公你真搞野

原帖由 fz7327 於 2008-5-1 18:16 發表

                               
登錄/註冊後可看大圖

http://www.youtube.com/watch?v=GwsqCm6Eo_M
點解有雜音ga??正吾正常??
(要用耳筒先聽到)

小問題...問題不大...個servo係度搵緊中位

波斯密碼...我竟然真係信...

原帖由 grass2 於 2008-5-1 23:44 發表

                               
登錄/註冊後可看大圖

小問題...問題不大...個servo係度搵緊中位

咁有冇辦法整走D聲??定係有聲先正常??

when did the sound come out?  when you turn your remote stick to max/min?  of in normal position?
If when you turn your remote stick to max/min the sound come out, then it means your servo already reach the maximum pitch than your stick give to, that means you need to set "travel" in your controller.  If this case, please shorten the travel, don't wait, for long term, this will damage your servo.  (IMO)

hope I am right

[ 本帖最後由 walkingfugture 於 2008-5-6 16:49 編輯 ]

原帖由 walkingfugture 於 2008-5-6 16:45 發表

                               
登錄/註冊後可看大圖

when did the sound come out?  when you turn your remote stick to max/min?  of in normal position?
If when you turn your remote stick to max/min the sound come out, then it means your servo already re ...

响正中間時

响正中間時??
then same as the brother mentioned above, it try to find a middle point.

My servo also have this problem sometimes (middle point only). Is it a big problem? or it's the sign of telling you the servo is going to die soon?  If not , then how to fix????????? Thx bro

[ 本帖最後由 Omega 於 2008-5-8 15:58 編輯 ]