請問各位師兄savaga x轉向係用緊咩servo

請問各位師兄savaga x轉向係用緊咩servo 因為我而家用緊3pks 一定要同digital servo 咁我玩開720 而家裝左隻hitec 既5245 落去 架車停就轉唔到 一行都轉到 咁就想問下師兄你地提意應該用幾kg以上既SERVO 停車先轉到呢 10KG以上得唔得呢???? THZ各位師兄

better use 13kg or higher torque servo for monster truck steering servo.
also the default setting of Savage X setting is too loose, try to set it be a bit tigher

原帖由 SunLi 於 2007-8-8 11:52 AM 發表

                               
登錄/註冊後可看大圖

better use 13kg or higher torque servo for monster truck steering servo.
also the default setting of Savage X setting is too loose, try to set it be a bit tigher

but I think 13kg is not enough~~~I think HITEC 20kg+'s servo will be better
and i will prefer savage doesn't need to use fast servo.......PCM receiveris enough (also, the sevo will be cheaper)

[ 本帖最後由 mark999hk 於 2007-8-8 11:57 編輯 ]

原帖由 mark999hk 於 2007-8-8 11:54 發表

                               
登錄/註冊後可看大圖

but I think 13kg is not enough~~~I think HITEC 20kg+'s servo will be better

I was using 13kg servo to play with you last time!! How was it???

13KGS is OK ka lar; I was used last time

原帖由 SunLi 於 2007-8-8 11:57 AM 發表

                               
登錄/註冊後可看大圖

I was using 13kg servo to play with you last time!! How was it???

yes, I am using 13kg (KO servo) too~~~the comment is~~~"ok la"

咁各位知唔知各牌子既13kg以上DIGITAL SERVO大約要幾$$呢??? 邊個牌子會好D呢??同埋13kg既servo夠唔力停車都有轉向呢????

[ 本帖最後由 dio0222 於 2007-8-8 12:24 編輯 ]

原帖由 dio0222 於 2007-8-8 12:19 PM 發表

                               
登錄/註冊後可看大圖

咁各位知唔知各牌子既13kg以上DIGITAL SERVO大約要幾$$呢??? 邊個牌子會好D呢??同埋13kg既servo夠唔力停車都有轉向呢????

Sorry, I have no idea about the dig. servo

o....................咁咪無人HELP ME.................

原帖由 dio0222 於 2007-8-8 12:35 PM 發表

                               
登錄/註冊後可看大圖

o....................咁咪無人HELP ME.................

why you don't use the pcm~~more choice with the servo and cheaper

我想家 不過又要買過套MONDULE 接收 咁買2手又驚佢有暗病 咁咪唔諗囉 一個接收用2架車囉

[ 本帖最後由 dio0222 於 2007-8-8 12:46 編輯 ]

原帖由 dio0222 於 2007-8-8 12:44 PM 發表

                               
登錄/註冊後可看大圖

我想家 不過又要買過套MONDULE 接收 咁買2手又驚佢有暗病 咁咪唔諗囉 一個接收用2架車囉

ok~~where do you play the savage ka? can we go to play together~~~and TKO is a best place for that pig too

我無所謂家 我住圍村的 就算唔出tko 我係屋企附近都有得玩的
我想問下futaba s9152呢隻servo岩唔岩放入去servo saver度呢 因為我睇好似比9451大左d個啵 我而家用9451 都仲有少少位 我就唔知9152岩唔岩位 9451就咁

原帖由 dio0222 於 2007-8-8 12:19 發表

                               
登錄/註冊後可看大圖

咁各位知唔知各牌子既13kg以上DIGITAL SERVO大約要幾$$呢??? 邊個牌子會好D呢??同埋13kg既servo夠唔力停車都有轉向呢????

I'm using KO 2364(13kg/0.13) be my Savage X steering servo...it is digital and quite reliable.
It is good enough torque on steering even your car is move or stay.

Also I have tried Futaba 9351(13kg/0.13) and Hitec 5955(24kg/0.15) on my truggy steering,
the Futaba one got build-in heatsink, and Hitec one got really high torque but slower speed. Both price is about the same $7XX,
need to see what you looking for..speed or torque.... and what is your transmitter/receiver using ...

但係 我都係覺得futaba or hitec會好d

日本台灣韓國
的選擇!

hec 有無得賣你講緊果3種servo家   有無師兄知道 futaba 既s9156賣緊幾錢呢???

[ 本帖最後由 dio0222 於 2007-8-8 17:01 編輯 ]

我就覺得大力過 12kg 既 servo 就用唔著﹐
反正個 servo safer 受力 < 12kg.
而當你 servo safer 較硬既話﹐ landing 唔靚好易死 servo.

一般來說﹐
12kg 和 0.15s servo 已經好夠玩。
有心機既話就搞好回氣喉同油喉先~

我唔係黎玩泥地家 我黎玩平地家咋 我係至在玩起圍果d野家咋

原帖由 BHP 於 2007-8-8 17:34 發表

                               
登錄/註冊後可看大圖

我就覺得大力過 12kg 既 servo 就用唔著﹐
反正個 servo safer 受力 < 12kg.
而當你 servo safer 較硬既話﹐ landing 唔靚好易死 servo.

一般來說﹐
12kg 和 0.15s servo 已經好夠玩。
有心機既話就搞好 ...

Could you send me some more informations about the servo safer of Savage....
I couldn't found out the forced limit of it in the instruction manual and HPI website....  thanks!!