{請教} 我部M18 唔係好識轉右...

{請教} 我部M18 唔係好識轉右...
佢轉左就好肯入灣...
佢轉右係轉到, 但..冇轉左咁肯入灣...哎...頂.

是否轉向杯的bearings 有事哩??

[ 本帖最後由 purplestar 於 2006-3-8 16:25 編輯 ]

你平時冇玩車有冇鬆開上住上比果 d 羅絲，d 彈弓長期頂住有可能上比孿左，
或者 servo saver 有問題，試一試用手轉頭輪，睇下兩邊鬆緊係咪掙好多，
或者頭輪直徑掙好多，又或者頭輪左右唔同度數.

原帖由 efour 於 2006-3-8 03:10 PM 發表
你平時冇玩車有冇鬆開上住上比果 d 羅絲，d 彈弓長期頂住有可能上比孿左，
或者 servo saver 有問題，試一試用手轉頭輪，睇下兩邊鬆緊係咪掙好多，
或者頭輪直徑掙好多，又或者頭輪左右唔同度數.

efour brother,

~我冇鬆開"臂"羅絲架...too bad...原來有關架?
~servo saver 係台xxxray 的option saver, 新買的.
~轉動頭輪時, 右邊係比左邊鬆少少, 但只係淨少少.
~頭輪左右係同一度數的elligi

其實同我用頭單向及尾珠叉有冇關架?
thx!

[ 本帖最後由 purplestar 於 2006-3-8 16:23 編輯 ]

hi, purplestar. in my point of veiw, it should be the front one-way different problem. you can try put the ball diff. in front, i think it may fix the problem.

原帖由 samy 於 2006-3-8 03:48 PM 發表
hi, purplestar. in my point of veiw, it should be the front one-way different problem. you can try put the ball diff. in front, i think it may fix the problem.

sammy brother, can I adjust the front one-way to solve problem?? or...change the bearings?
thx!

it may not fixed even you adjust the front one-way diff. becasue of it is easy to broke after crash. if it does not crash before, or you need some oil on one-way bearings. (p.s. it has two one-way bearings)

呀, 琴晚, 小弟adjust 前及後的彈弓setting 後(用Atomic 的options -Adjustable Shocks 及options 彈弓), 明顯地比較肯入灣(左右兩邊都係), 唯獨係...始終都係左邊比右邊更肯入灣...
哎...

it will happen when the one-way bearings are uneven.

thx for your info, brother!