RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

 找回密碼
 新玩家註冊
搜索
查看: 1778|回復: 10
打印 上一主題 下一主題
收起左側

Inferno ST and US Sports

[複製鏈接]
跳轉到指定樓層
1#
bigben 發表於 2007-6-5 15:06:13 | 只看該作者 回帖獎勵 |倒序瀏覽 |閱讀模式

遊客登錄

您需要 登錄 才可以下載或查看,沒有帳號?新玩家註冊

x
I am playing EP car (buggy), can now want to try GP buggy or truggy, previously I want to buy a 2nd savage but finally I change my mind cos I am afraid I cannot tune this powerful engine well and (limited space of home.... )

Therefore, I want to buy a inferno US sports RTR ($2280) but at the same time I saw a inferno ST RTR ($2680 only). I want to choose one of them.

!) Is ST easy to be broken?
2) Is the US sports better than ST in term of it quality and engine??
3) any other suggestion?
(I would not consider Hong Nor.....)
Thanks a lot !

[ 本帖最後由 bigben 於 2007-6-12 15:57 編輯 ]
2#
leeho888 發表於 2007-6-5 16:46:03 | 只看該作者
3#
 樓主| bigben 發表於 2007-6-5 16:57:26 | 只看該作者
oh, u spend over thousand to modify it, right?

how about the engine, original one good enough?
4#
diablo 發表於 2007-6-5 17:17:43 | 只看該作者
I have a ST US sports too. Very fun to play.  Not for racing though.
5#
leeho888 發表於 2007-6-5 17:40:18 | 只看該作者
6#
 樓主| bigben 發表於 2007-6-12 14:49:45 | 只看該作者
I will go to buy a inferno US SPORTS (Buggy one, not ST) next month..... (平平地玩住先啦.....)
what do I need to notice??
any must buy hop-up?
7#
ftbingobingo 發表於 2007-6-12 15:13:06 | 只看該作者
1) ST底板後部份如果跳得勁會彎, 其他野無mud問題
2) quality and engine almost the same
3) No, at this price

BTW, if you change tires, it uses 19mm hex and most truggies use 17mm; when your stock engine is finished, you should spare $4xx to buy engine mount, flywheel, flywheel nut, clutch, clutch springs

[ 本帖最後由 ftbingobingo 於 2007-6-12 15:19 編輯 ]
8#
 樓主| bigben 發表於 2007-6-12 15:56:25 | 只看該作者
thks a lot!!
9#
agentjerry 發表於 2007-6-12 21:24:13 | 只看該作者
10#
ftbingobingo 發表於 2007-6-13 01:30:34 | 只看該作者
But actually I would recommend Hong Nor, because the engine comes with RTR kit is better, the durablity is higher, and you can save all $$$ to buy engine mount, flywheel, clutch, 17mm hex, dog bone cups for 17mm hex when you do any upgrade to the truck. Also manifold and pipe comes with HN is more useful than Kyosho, at least it will fit most .21-.32 engines. However, you must pay about $800 more to have a HN RTR kit
11#
 樓主| bigben 發表於 2007-6-13 09:09:54 | 只看該作者
but Hongkor RTR kit cost more than 32xx.... or higher...

devil.....devil.....!!!!

[ 本帖最後由 bigben 於 2007-6-13 09:36 編輯 ]
您需要登錄後才可以回帖 登錄 | 新玩家註冊

本版積分規則

手機版|小黑屋|RC EVOLUTION - 遙控工房

GMT+8, 2024-4-29 06:30 , Processed in 0.100481 second(s), 18 queries , Gzip On.

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回復 返回頂部 返回列表