唉！今日開心得濟 ......

架 DF-03 成架飛左落水！唔係水 "" ，係飛左落去水渠去唔到個 d 積水度！

成架半浮半沉咁晌度玩浮潛。而家見到佢 d羅絲有 d 生左秀， d 電子野應該死晒。

想問下我係未應該成架打散，再搵白電油浸佢，然後再重新砌反？？

點解咁唔小心阿

我未有過咁既經驗.. 答你唔到.. 抱歉..

不過D人話係要用白電油洗洗佢

做乜唔影低珍貴既一刻呀!?

原帖由 ALEXANDER 於 2007-6-4 02:06 發表
做乜唔影低珍貴既一刻呀!?

你又係咁！！

我跑佢執反起部車唔夠兩五秒已經比人好似你咁話我：做乜咁快囉佢上黎，等我影張相先嘛！

影低佢等大家引以為鑬嘛

咁唔小心呀.....

而家點算呀 ~~~~~~~~~~~~~ ？

remove the batteries, esc, receiver, servos... put it aside and let it dry, then remove all bearings and soak it with WD40, then after a day or two, dry the bearings and add bearing oil...  and the screws.... no need to change unless you want to have an excuse to change to TRF blue law...

我覺得個電變同接收應該 TOL 左

因為佢玩浮潛到我行過去囉反起佢都成 10 幾 20 秒，囉反上黎都唔識得郁了

did you remote the batteries right away?

囉反上黎第一時間熄制，

跟住滴乾水之後就唔識郁囉

did you "disconnect" the batteries.... flipping the switch doesn't mean the power is disconnected....

膠料唔會浸白電油,會發脹.
金屬件先好浸.

電變換過隻la
但servo,接受用風筒吹乾,多數用得返.

原帖由 mikewu 於 2007-6-4 11:39 發表
did you "disconnect" the batteries.... flipping the switch doesn't mean the power is disconnected....

有熄制同 "抆" 走排電 ~~`

原帖由 sIUcHuN 於 2007-6-4 11:43 發表
膠料唔會浸白電油,會發脹.
金屬件先好浸.

電變換過隻la
但servo,接受用風筒吹乾,多數用得返.

唉 ~~~~ 一次意外，足以致命！！

原帖由 大頭妹 於 2007-6-4 11:49 發表


有熄制同 "抆" 走排電 ~~`

let them (esc, receiver and servo) sit and dry for a few days, take the buggy apart and clean the old grease, add new grease.  Then remove the bearings and follow the instructions I just gave you...  then put them back together and that's it!  
But I think your ESC likely is totalled.. the receiver and servo "might" have a chance to servive... try them after a few days of drying man...  good luck...

呢次真係 " 實到無朋友"

快D打開电變,接收及servor個殼, 索旱Ｄ水或用風筒吹,可能用得返. 千其唔好心急插电,即打柴!!

原帖由 RcFun 於 2007-6-4 14:44 發表
快D打開电變,接收及servor個殼, 索旱Ｄ水或用風筒吹,可能用得返. 千其唔好心急插电,即打柴!!

Agree....試過一樣情况,之後乾番又Work咁神奇
不過未乾透千其唔有通电....

水渠個 d 積水 !? even 乾番 will smell like s_it