RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

 找回密碼
 新玩家註冊
搜索
查看: 1706|回復: 14
打印 上一主題 下一主題
收起左側

My new 2WD XXX-CR

[複製鏈接]
跳轉到指定樓層
1#
barrypops 發表於 2007-5-19 01:19:51 | 只看該作者 回帖獎勵 |倒序瀏覽 |閱讀模式

遊客登錄

您需要 登錄 才可以下載或查看,沒有帳號?新玩家註冊

x
I also have one BK2.....
This XXX-CR is having a little bit of details different from BK2.....a little improvement !

[ 本帖最後由 barrypops 於 2007-5-19 01:20 編輯 ]
2#
RX78amuroray 發表於 2007-5-19 01:21:27 | 只看該作者
where to buy? Fast 折?
3#
 樓主| barrypops 發表於 2007-5-19 01:28:25 | 只看該作者
I bought it from Ebay few weeks ago....ah !!!!!!!!!!!!

Cause Fast 折 hasn't any in two weeks ago
4#
loken 發表於 2007-5-19 08:40:30 | 只看該作者
How much it cost?
5#
buggy 發表於 2007-5-19 09:57:41 | 只看該作者
is it graphite composite chassis as the BK2?
6#
 樓主| barrypops 發表於 2007-5-19 12:40:12 | 只看該作者
原帖由 buggy 於 2007-5-19 09:57 發表
is it graphite composite chassis as the BK2?


It said it was made by  EA3 material.....which is harder...than BK2
7#
 樓主| barrypops 發表於 2007-5-19 12:42:09 | 只看該作者
原帖由 loken 於 2007-5-19 08:40 發表
How much it cost?


USD 220 = HKD 1700
But the shipping is USD 40 by UPS

BUT it came along with 5 spare parts......
8#
jas 發表於 2007-5-20 11:54:00 | 只看該作者
Makes me miss my XX-CR from long time ago... may be 9 to 10 years ago.
9#
hkBuggyboy 發表於 2007-5-20 19:03:07 | 只看該作者
I also have xx-cr too. & ready to play in TRC for fun
10#
hkBuggyboy 發表於 2007-5-20 21:23:01 | 只看該作者
原帖由 jas 於 2007-5-20 11:54 發表
Makes me miss my XX-CR from long time ago... may be 9 to 10 years ago.



You stiill own this car?
11#
rcplayer 發表於 2007-5-20 22:08:47 | 只看該作者
原帖由 hkBuggyboy 於 2007-5-20 19:03 發表
I also have xx-cr too. & ready to play in TRC for fun

how much of the xxx-cr  ?
12#
 樓主| barrypops 發表於 2007-5-20 23:02:10 | 只看該作者
原帖由 rcplayer 於 2007-5-20 22:08 發表

how much of the xxx-cr  ?


$1800
13#
joho 發表於 2007-5-21 14:55:07 | 只看該作者
Barry, the EA3 are actually softer then the graphite arm on BK2, with EA3, the car were easy to drive due to more flex. But if you want to bullet proof it, then you should change the front arm into Graphite version.
XXX-CR is very easy to drive, a very nice full competition buggy indeed, now all you need is some brushless motor..

原帖由 barrypops 於 2007-5-19 12:40 發表


It said it was made by  EA3 material.....which is harder...than BK2
14#
 樓主| barrypops 發表於 2007-5-21 22:57:13 | 只看該作者
原帖由 joho 於 2007-5-21 14:55 發表
Barry, the EA3 are actually softer then the graphite arm on BK2, with EA3, the car were easy to drive due to more flex. But if you want to bullet proof it, then you should change the front arm into ...


Hi ! Joho.....
Thanks for your advise ! But ...which brushless is the best for buggy ?

Are you in Hong Kong ?
Let 's play together ...with ....vintage buggies
15#
joho 發表於 2007-5-22 17:00:27 | 只看該作者
Damn, Barry! You really know me! hahaha I will love to play some vintage, I am in HK right now, but my collection is not.. Let's wait till the Hotshot is out, at least I can buy a few of them in here!
For 2WD, highly recommend 7.5 turn (Hard to found in HK thou), not everyone is good enough to drive a 6.5, too much for us..
For speedo, I will recommend LRP, for motor, I love Novak more. Forget the new orion, they have holes in their can, not recommend for off-road..
By the way Barry, slightly off topic here, but lately I am having a hard time to include a AYK model in my collection, I really want the Radiant, can you point me to the right direction? You can answer me through PM..
您需要登錄後才可以回帖 登錄 | 新玩家註冊

本版積分規則

手機版|小黑屋|RC EVOLUTION - 遙控工房

GMT+8, 2024-4-29 06:21 , Processed in 0.043776 second(s), 18 queries , Gzip On.

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回復 返回頂部 返回列表