RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

 找回密碼
 新玩家註冊
搜索
查看: 7222|回復: 24
打印 上一主題 下一主題
收起左側

平玩 12GT 英國 Schumacher 碳纖底板 走珠差速

[複製鏈接]
跳轉到指定樓層
1#
jethobby 發表於 2015-9-18 18:55:15 | 只看該作者 回帖獎勵 |倒序瀏覽 |閱讀模式

遊客登錄

您需要 登錄 才可以下載或查看,沒有帳號?新玩家註冊

x
本帖最後由 jethobby 於 2015-9-18 19:08 編輯

Schumacher

K154 - SupaStox GT Kit - S1/Diff
K157 - SupaStox GT Kit - C/F





NEW - Lightweight Low Centre of Gravity CNC Alloy Motor Mounts.      NEW - Pivot Ball Rear End with Front to Back Tube Damper for Improved Bump Riding.
NEW - Adjustable Rear Ride Height Via Rear Axle Adjusters.
NEW - Adjustable Front Ride Height on King Pin.
NEW - Rear Tweak and Roll Stiffness Adjustment via springs and spring position.
NEW - Adjustable Rear Droop with droop screws.
NEW - Adjustable Front Droop screws.
NEW - Shorter, Narrower and stiffer 2.5mm Carbon Fibre or 2.5mm S1 Composite Chassis.
NEW - Small Kimbrough Servo Saver with Strengthener Included As Standard for improved Steering Geometry.
NEW - Lightweight Front Foam Bumper and Mounting For Great Protection.
NEW - Included Ball Bearing Front Wheels.
NEW - Tweak Free Battery Mounting with Tape. Option Battery Strap Available.
NEW - CNC Brass Weight Position on Rear Pod for Better Balance.
NEW - Chassis Weight Balance Pivot Holes. For Use With U3582 Pivot Set.
NEW - Adjustable Ackerman with Washers.
NEW - Pivot Front Suspension With Camber, Castor, Droop And Toe-in/out Adjustment.
NEW - Improved Ground Clearance Rear Body Mounting.
NEW - Multiple Servo Mounting Positions.
70T 48 dp High Efficiency Spur as Standard.
Chassis accepts 1S or 2S Shorty.
CNC Alloy Drive Dog Outputs For Precision And Durability.
CNC High Tensile, Stainless Steel Rear Axle.
High Tensile, Stainless Steel Suspension Pivots.
High Tensile Steel Hex Screws Used Throughout.
Adjustable Steering Turnbuckles Included As Standard.
Ball Raced Rear Axle With Rubber Sealed Bearings.
High Quality Easy to Follow Instruction Manual.
Large Range Of Optional 32 and 48dp Spur Gears.
Fully Adjustable Body Mount System.
Contact Pre-glued And Trued Foam Tyres Included,
35sh Rear and 47sh Front.Full Range Of Optional Colour Coded Springs.
Accepts A Huge Range Of Industry Standard Bodyshells, Motors, Batteries, And Speed Controllers.
Torsional Side Damping Adjusted with 'O' Rings or Speed Secret Optional Tube Dampers.



2#
sam 發表於 2015-9-19 10:19:05 來自手機 | 只看該作者
兩款有咩分別?
3#
空降兵 發表於 2015-9-19 19:02:57 | 只看該作者
請問幾$及有义速是邊一個型號。有現貨嗎?。
4#
RCK 發表於 2015-9-19 19:54:08 來自手機 | 只看該作者
几錢??
5#
 樓主| jethobby 發表於 2015-9-21 14:11:13 | 只看該作者
空降兵 發表於 2015-9-19 19:02
請問幾$及有义速是邊一個型號。有現貨嗎?。

For pricing, please click: Schumacher - SupaStox GT Kit

K154 - 纖維底板 + 差速
K157 - 碳纖底板 (差速-optional, 有現貨)
6#
 樓主| jethobby 發表於 2015-9-21 14:12:59 | 只看該作者
sam 發表於 2015-9-19 10:19
兩款有咩分別?

K154 - 纖維底板 + 差速
K157 - 碳纖底板 (差速-optional, 有現貨)
7#
 樓主| jethobby 發表於 2015-9-21 14:13:16 | 只看該作者

For pricing, please click: Schumacher - SupaStox GT Kit
8#
hcchan 發表於 2015-9-26 14:49:18 | 只看該作者
請問這車是用什麽呔呢? Thx
9#
littlewolf263 發表於 2015-9-27 00:41:18 | 只看該作者

前轆係用公制啤鈴,fit唔到現市場上十二仔前呔鈴,  對嗎?
10#
hcchan 發表於 2015-10-2 17:50:07 | 只看該作者
請問有無OPTION ? U4647, U4625 .U3966,U3967 THX
11#
hcchan 發表於 2015-10-2 18:00:46 | 只看該作者

                               
登錄/註冊後可看大圖
12#
hcchan 發表於 2015-10-2 18:04:57 | 只看該作者
13#
 樓主| jethobby 發表於 2015-10-6 00:48:30 | 只看該作者
hcchan 發表於 2015-10-2 17:50
請問有無OPTION ? U4647, U4625 .U3966,U3967 THX

沒有現貨, 要訂嗎?
約 5天到貨

14#
hcchan 發表於 2015-10-6 02:55:49 | 只看該作者
好thx
15#
hcchan 發表於 2015-10-9 07:44:06 | 只看該作者
jethobby 發表於 2015-10-6 00:48
沒有現貨, 要訂嗎?
約 5天到貨

到貨請pm
16#
 樓主| jethobby 發表於 2015-10-9 13:02:58 | 只看該作者

U4647, U4625 .U3966, U3967 - 各一?
請確認!
17#
hcchan 發表於 2015-10-9 13:55:45 | 只看該作者
jethobby 發表於 2015-10-9 13:02
U4647, U4625 .U3966, U3967 - 各一?
請確認!

yes,  U4647, U4625 .U3966, U3967 - 各一, 加U3969
18#
 樓主| jethobby 發表於 2015-10-9 14:44:24 | 只看該作者
hcchan 發表於 2015-10-9 13:55
yes,  U4647, U4625 .U3966, U3967 - 各一, 加U3969

收到!  
方便留個電話號碼嗎?  請 PM, 以便到貨後 whatsapp 通知你!
19#
hcchan 發表於 2015-10-10 13:54:15 | 只看該作者
已PM thx
20#
 樓主| jethobby 發表於 2015-10-10 20:13:32 | 只看該作者

收到了!  
預計下週五前到貨!  貨到後會 whatsapp 通知!






您需要登錄後才可以回帖 登錄 | 新玩家註冊

本版積分規則

手機版|小黑屋|RC EVOLUTION - 遙控工房

GMT+8, 2024-4-30 05:42 , Processed in 0.049555 second(s), 17 queries , Gzip On.

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回復 返回頂部 返回列表