沙猪比較容易損壞是邊 PART 呀？

唉~~嗰日吾係好識用個電撻，不停係咁撻.....終放搞壞咗電撻入面粒單向。而家想換返個手拉好似好啲，一來可以就倒力同吾怕個電撻冇電。

仲有想問吓各師兄，沙猪比較容易損壞是邊 PART 呀？Thanks

[ 本帖最後由 天照 於 2006-2-14 12:27 編輯 ]

Spur gear .... 經常性掃牙 .....

狗骨杯，亦經常性打爆 ......

原帖由 Skyline 於 2006-2-14 11:05 AM 發表
狗骨杯，亦經常性打爆 ......

thanks, 頭定尾呀？

原帖由 Skyline 於 2006-2-14 11:04 AM 發表
Spur gear .... 經常性掃牙 .....

sorry, where is it located?

原帖由 mark999hk 於 2006-2-14 11:09 發表


thanks, 頭定尾呀？

後輪，另外原庒 break 粒膠六角都好易撻哂

原帖由 mark999hk 於 2006-2-14 11:10 發表


sorry, where is it located?

車中間凸咗出嚟好大隻嘅齒輪 ....

原帖由 Skyline 於 2006-2-14 11:36 AM 發表



車中間凸咗出嚟好大隻嘅齒輪 ....

how much of that 大隻嘅齒輪?

原帖由 mark999hk 於 2006-2-14 11:40 發表


how much of that 大隻嘅齒輪?

$2X per piece ... don't worry ...   

原帖由 mark999hk 於 2006-2-14 11:40 發表


how much of that 大隻嘅齒輪?

Oh yes, regarding your roto start and the damaged one-way bearing issue.  Is there anything wrong with the engine where U cannot start the engine, even if U keep using the roto start?  Since the roto start provides a very powerful turning force, it can damage the engine if keep pressing the one button for a long time.

原帖由 Skyline 於 2006-2-14 01:40 PM 發表



Oh yes, regarding your roto start and the damaged one-way bearing issue.  Is there anything wrong with the engine where U cannot start the engine, even if U keep using the roto start?  Since  ...

Thanks for opinion.  So, I will change the hand start for the savage. It will be easy for me to use.

原帖由 mark999hk 於 2006-2-14 13:45 發表


Thanks for opinion.  So, I will change the hand start for the savage. It will be easy for me to use.

That's up to U la brother, but remember not to pull too hard when starting, cause I've broke many pull start before ...  

原帖由 mark999hk 於 2006-2-14 09:44 發表
唉~~嗰日吾係好識用個電撻，不停係咁撻.....終放搞壞咗電撻入面粒單向。而家想換返個手拉好似好啲，一來可以就倒力同吾怕個電撻冇電。

仲有想問吓各師兄，沙猪比較容易損壞是邊 ...

副計末run in好最好都唔好用電撻住！因壓力仲係比較大,買個粒one way用住手拉先啦師兄。

原帖由 rickyl215 於 2006-2-14 04:16 PM 發表

副計末run in好最好都唔好用電撻住！因壓力仲係比較大,買個粒one way用住手拉先啦師兄。

Not run in yet~~~sorry, do I know you?

原帖由 Skyline 於 2006-2-14 02:17 PM 發表



That's up to U la brother, but remember not to pull too hard when starting, cause I've broke many pull start before ...  

Mr. Skyline, do you have Savage X?

因副計只run in咗1L油左右,所以未完全run in好架！

原帖由 rickyl215 於 2006-2-14 04:48 PM 發表
因副計只run in咗1L油左右,所以未完全run in好架！

Oh~~you are the guy who sell the Savage to me~~?

因副机係我帮佢run架！

原帖由 rickyl215 於 2006-2-14 04:53 PM 發表
因副机係我帮佢run架！

ok~~but how many "L" need to run in of this 25 class engine ka?  Thanks

大约3L左右,當然最正確要感覺下 sleeve同 piston仲緊唔緊.(已上只作參考)