RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

 找回密碼
 新玩家註冊
搜索
12
返回列表 發新帖
樓主: mofaalan
打印 上一主題 下一主題
收起左側

請教購買PHANTOM 2 VISION PLUS的問題

[複製鏈接]
21#
 樓主| mofaalan 發表於 2014-9-5 21:57:57 | 只看該作者
kendcsxaz 發表於 2014-9-5 20:16
當然h3-3d好v+云台好易壞,通常一炸就壞,寄順丰可以!

plus 9千幾
配雲台 hero 3 成12xxx.....

差3千蚊 @@
22#
elton2xxx 發表於 2014-9-6 10:25:05 | 只看該作者
solaris8x86 發表於 2014-9-5 16:24
Of course 第2個option喇,5.8Ghz Analog圖傳起碼個螢幕流暢好多,玩到"正常"FPV,唔使睇到窒Q死。
...

solaris8x86 ching,
I am also bugged by option 1 and option 2.  Especially the weight of option 2 (heavier?) and option 2 does not have OSD unless install another OSD.  So Option 2 needs to install, camera, vtx, osd.
23#
solaris8x86 發表於 2014-9-6 10:43:51 | 只看該作者
elton2xxx 發表於 2014-9-6 10:25
solaris8x86 ching,
I am also bugged by option 1 and option 2.  Especially the weight of option 2 ( ...

Yeah. Although Op.2 is a bit tricky. But you certainly will not happy with Op.1. Because the original junk camera comes with Vision/+ is very very lag due to it is a WiFI camera transmitted by digital radio wave (square wave). It is almost un-useable in a real flight. Only analog wave (sine wave 玄波) can constantly streaming the video without lagging in Physic. So, spending effort like adding an OSD is worthy for professional FPV flyers in Op.2.

Of course, if you know nothing about RC integration. Then the only choice is Op.1 (Vision/+ 儍瓜機).
24#
unun 發表於 2015-1-4 22:05:09 來自手機 | 只看該作者
如果我舊電壞左又俾唔到買機憑証俾佢,佢搞唔搞
您需要登錄後才可以回帖 登錄 | 新玩家註冊

本版積分規則

手機版|小黑屋|RC EVOLUTION - 遙控工房

GMT+8, 2024-4-29 18:05 , Processed in 0.056846 second(s), 13 queries , Gzip On.

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回復 返回頂部 返回列表