我買過最貴的 "玩具" !!!

我的玩機歷程:

1. 小蜜蜂 $240  ----> 飛得起, 幾過癮, 玩左幾次, 撞爛左...救唔返.

2. Robbin 22 $650 ----> 操控自如, 勁好玩, 玩左幾個星期....想試下玩單槳機.

3. 36# $1480  ---->　飛都飛唔起, 一離地一尺到, 佢就周圍走, 控唔住...玩左兩次...撞爛左...後尾換埋金屬頭尾同全機 servo (~$500), 都係玩多一次, 連金屬頭都撞爛, 醫返 "side" 藥費, 同埋我始終覺得隻機有問題, 唔想再玩佢....

本來想就咁算, 但係又忍唔到手....結果...盛惠 $5000 大洋 (同老婆講做緊特價,全 set $499, 好彩佢無懷疑

                               
登錄/註冊後可看大圖

)

Oh my goooood, return is the land......  Maybe this is only the beginning!!   

Like me before!!

Good luck!!

試過枝 6EX 可以控到隻 Robbin 22, 正 !!!

你好有勇氣呀 ! 我有錢都唔感買住. 要好似你gum玩掂隻Lama先敢再想 !

好快你就要換遙控了...T6EX-H SET CCPM 你會叫救命的..
係咁架呢, 有得一架450, 就會有第2架......第3架.............

成為老婆/女友/錢包最大敵人...

499.....講小左個位啵

trex 450 se ~ 好野黎喎.

5000 變 499 ??? 佢會唔會走去 check 價呀 ? 又或者佢同事/朋友都想學飛咪.....捉虫 ?

"36# $1480  ---->　飛都飛唔起, 一離地一尺到, 佢就周圍走, 控唔住...玩左兩次...撞爛左...後尾換埋金屬頭尾同全機 servo (~$500), 都係玩多一次, 連金屬頭都撞爛, 醫返 "side" 藥費, 同埋我始終覺得隻機有問題, 唔想再玩佢....'

#36很難飛嗎? 還想從LAMA V3換機tim.

Chris - do you have breakdown of your cost?  I am thinking of buying one now!

請問呢盒係乜野尼?

我已經到 step 3.. .  好快會步你後塵!

Well, yes... it's common to get the first one, the second one and then... more and more.

While you talked to your wife that you spent 499 only, i also told my wife that my GP heli cost 3xxx while it's about 7xxx....

WE, men, are always liars.

請問你係什麼地方買???????

Align 450SE kit  --- $2280
Align brushless motor and ESC -- $746
Futaba GY401 -- $890
Futaba 6EX (72Hz) -- $785
XTR -- $280
Futaba flight sim connector -- $67
Carbon fiber blade -- free gift


The blue box is the XTR sw with a USB cable.

I bought the above at Mongkok upstair shop.
Leave email if you want to know the address, don't want to make advertisment here.

pls give me the shop name, and address.... e-mail  address already pm you...many thank.

PM

Oh. Chris Wong. Welcome to the family of RC helicopter.

I reassure you, you will soon spend much much more money on this hobby if you keep on playing.

There is only two fates after you play RC helicopter:

you either dedicated yourself to spend at least few months (almost daily) practising (or keep on buying parts for repairing if you keep on crashing) RC helicopter and playing flight sim at home until you succeed;

or you will simply give up this hobby after a few serious crashes if you are not careful.

Flying Robin is completely different from flying real heli

I suggest you to find a RC helicopter master (maybe you can ask the boss of the heli hobby shop to help you) and practice with his help; and also you must use training gear to learn hovering very slowly and patiently, and spend the rest of the time playing your XTR flight sim. You will save a lot of money and time.

please refer to the below link: it is really good

http://www.dream-models.com/eco/index.html

[ 本帖最後由 petscan 於 2007-1-24 20:26 編輯 ]

原帖由 ChrisWong 於 2007-1-24 16:28 發表
Align 450SE kit  --- $2280
Align brushless motor and ESC -- $746
Futaba GY401 -- $890
Futaba 6EX (72Hz) -- $785
XTR -- $280
Futaba flight sim connector -- $67
Carbon fiber blade -- free gift
...

450se kit 在那間買？

heehee
good for you

原帖由 ChrisWong 於 2007-1-24 16:28 發表
Align 450SE kit  --- $2280
Align brushless motor and ESC -- $746
Futaba GY401 -- $890
Futaba 6EX (72Hz) -- $785
XTR -- $280
Futaba flight sim connector -- $67
Carbon fiber blade -- free gift
...

不要說出來,xtr $280.-是老番,正版 $1900.- 小心害人比海關衾檔