Receiver 同 Servo 嘅配對

原帖由 mark999hk 於 2006-2-9 11:20 發表


so, if I use 2143 and 2344, they must can use on the HRS?

and I have a last question, what is ko's 2174 spec.?  Thanks

Mark, go to below site to check.

http://www.kopropo.com/servos.htm

原帖由 Oakfield 於 2006-2-9 02:04 PM 發表


Mark, go to below site to check.

http://www.kopropo.com/servos.htm

Thank you

PS= Analog
PDS=Digital
HRS> Digital Servo only  (X Analog Servo)
FM / PCM & other Receiver >Digital Servo & Analog Servo too work

原帖由 ppl 於 2006-2-9 10:34 發表

小弟都係斷估 : Digital Receiver 係可以控制 Analog Servo ,而 Analog Receiver 係不可控制 Digital Servo ,    得出既答案係可以用既.
如有錯請各位大佬更正.(我都想知係唔係咁)

完全錯哂

原帖由 rickyl215 於 2006-2-9 16:03 發表
PS= Analog
PDS=Digital
HRS> Digital Servo only  (X Analog Servo)
FM / PCM & other Receiver >Digital Servo & Analog Servo too work

係唔係咁先???全部排子一樣???

原帖由 ppl 於 2006-2-12 02:20 發表

係唔係咁先???全部排子一樣???

係

我又想問下接收 "HRS"/"PCM"係點解???有乜分別???

原帖由 ppl 於 2006-2-12 15:15 發表
我又想問下接收 "HRS"/"PCM"係點解???有乜分別???

HRS = High Response System
PCM = Pulse Code Modulation

PCM 會將訊號變成一種密碼，要同樣有PCM receiver，才可以解碼 !!

原帖由 binary 於 2006-2-12 15:20 發表


HRS = High Response System
PCM = Pulse Code Modulation

PCM 會將訊號變成一種密碼，要同樣有PCM receiver，才可以解碼 !!

唔該曬,有冇話邊一種好o的?一般用邊種?邊隻控係PCM?HRS有冇話邊隻控先有??

原帖由 ppl 於 2006-2-12 03:25 PM 發表

唔該曬,有冇話邊一種好o的?一般用邊種?邊隻控係PCM?HRS有冇話邊隻控先有??

I am using HRS receiver and PCM receiver with 3PK.

原帖由 volvo9 於 2006-2-9 10:46 發表
If use a analogue servo in HRS receiver. Severe damage to all electronics may result.
(Copy from 3pk-manual)

yes, you are right.

somebody tried:
HRS receiver + 9402 (analogue) = burn servo
HRS receiver + 3003 (analogue)= burn servo
HRS receiver + KO2173 (analogue) = burn servo

I only use HRS + Fuaba digital servos (3050, 9450, 9451, 9550...), very good and have been used for several year with no porblem.   

For HRS + KO digital......I don't know.

原帖由 apsubmarine3 於 2006-3-6 02:52 PM 發表



yes, you are right.

somebody tried:
HRS receiver + 9402 (analogue) = burn servo
HRS receiver + 3003 (analogue)= burn servo
HRS receiver + KO2173 (analogue) = burn servo

...

HRS Receiver + 三和 Digital Servo......no problem

HRS receiver + KO digital servo = burn

原帖由 暴風超音 於 2006-3-6 17:22 發表
HRS receiver + KO digital servo = burn

吓....!? 我用 HRS receiver + KO 2343 digital servo in my EP,無問題wor.

原帖由 Edde 於 2006-3-6 19:05 發表


吓....!? 我用 HRS receiver + KO 2343 digital servo in my EP,無問題wor.

我果隻燒左

原帖由 暴風超音 於 2006-3-6 19:16 發表

我果隻燒左

請問 servo 燒左, Receiver 有無事?
我這組合玩了近半年都無事 wor.

原帖由 暴風超音 於 2006-3-6 17:22 發表
HRS receiver + KO digital servo = burn

唔係卦,我用咗HRS搭兩隻都係KO servo,用咗年幾都冇問題出現過喎,我諗係你隻servo夠期啫

原帖由 Edde 於 2006-3-6 19:30 發表


請問 servo 燒左, Receiver 有無事?
我這組合玩了近半年都無事 wor.

Receiver 無事
你話你隻冇野我話我隻燒左 ... 是但啦 ...

原帖由 devilstar 於 2006-3-6 21:37 發表

唔係卦,我用咗HRS搭兩隻都係KO servo,用咗年幾都冇問題出現過喎,我諗係你隻servo夠期啫

巧口力口力口育＊＊～～～＊＊

原帖由 暴風超音 於 2006-3-6 22:28 發表

Receiver 無事
你話你隻冇野我話我隻燒左 ... 啦是但 ...

???????你話你隻冇野我話我隻燒左 ... 啦是但