Receiver 同 Servo 嘅配對

我有一個小小的問題，請各位大佬幫幫忙。我而家有一個 Futaba HRS 接收及兩隻 Digital Servo (轉向及油門、Break) 和一隻 Analog Servo (後波)，咁想問吓如果將個後波用的 Analog Servo 放落個 HRS 接收，這樣個後波用的 Analog Servo 會吾會 Work 及有冇問題？ 謝

P.S.  我是用3PK控
       Servo: KO pd 2173 (轉向) ,pds 2344 (油門及 Break) ,712 (後波)

原帖由 mark999hk 於 2006-2-9 09:28 發表
我有一個小小的問題，請各位大佬幫幫忙。我而家有一個 Futaba HRS 接收及兩隻 Digital Servo (轉向及油門、Break) 和一隻 Analog Servo (後波)，咁想問吓如果將個後波用的 Analog Servo 放落個 HRS 接收 ...

Mark 兄，我估唔 work (純粹斷估，極可能估錯！)

BTW, have you fixed your Yokomo EP Touring car??  

原帖由 binary 於 2006-2-9 09:50 AM 發表


Mark 兄，我估唔 work (純粹斷估，極可能估錯！)

BTW, have you fixed your Yokomo EP Touring car??  

Hi, I will use the Yokomo to play drift~~

2173 is a Analogue Servo, no Digital Servo you know

原帖由 mark999hk 於 2006-2-9 09:28 發表
我有一個小小的問題，請各位大佬幫幫忙。我而家有一個 Futaba HRS 接收及兩隻 Digital Servo (轉向及油門、Break) 和一隻 Analog Servo (後波)，咁想問吓如果將個後波用的 Analog Servo 放落個 HRS 接收 ...

小弟都係斷估 : Digital Receiver 係可以控制 Analog Servo ,而 Analog Receiver 係不可控制 Digital Servo ,    得出既答案係可以用既.
如有錯請各位大佬更正.(我都想知係唔係咁)

原帖由 mark999hk 於 2006-2-9 09:28 發表
我有一個小小的問題，請各位大佬幫幫忙。我而家有一個 Futaba HRS 接收及兩隻 Digital Servo (轉向及油門、Break) 和一隻 Analog Servo (後波)，咁想問吓如果將個後波用的 Analog Servo 放落個 HRS 接收 ...

hope it will be useful......

原帖由 volvo9 於 2006-2-9 10:34 AM 發表
2173 is a Analogue Servo, no Digital Servo you know

咁我想問吓三和的 WR, 是不是 Digital Servo 呀？ 而佢哋的速度、扭力又是幾多嘅？  Thanks

[ 本帖最後由 mark999hk 於 2006-2-9 10:43 編輯 ]

原帖由 mark999hk 於 2006-2-9 10:39 發表


咁我想問吓三和的 WR, 是不是 Digital Servo 呀？ And the S9402 is Digital, right? 而佢哋的速度、扭力又是幾多嘅？  Thanks

S9402 is analog.   

Hope this help. http://www.rc-evo.com/m_newhand/hand031.html

原帖由 SunLi 於 2006-2-9 10:37 AM 發表


hope it will be useful......

Thanks for your imformation~~~very useful~

If use a analogue servo in HRS receiver. Severe damage to all electronics may result.
(Copy from 3pk-manual)

原帖由 SunLi 於 2006-2-9 10:37 AM 發表


hope it will be useful......

咁 2173 (圖上有圓點) 是不是可放在 HRS Receiver 上面用？ Thanks

WR is Digital Servo

原帖由 volvo9 於 2006-2-9 10:48 AM 發表
WR is Digital Servo

咁請問 Mr. volvo9 知吾知佢嘅轉向速度和扭力是幾多呀？謝

if you use kR-302F receiver with EX10, the answer is OK. But in Futaba HRS, the answer is "NOT"

原帖由 volvo9 於 2006-2-9 10:56 AM 發表
if you use kR-302F receiver with EX10, the answer is OK. But in Futaba HRS, the answer is "NOT"

Thanks you very much

So, 三和的 WR can use on the Futaba HRS Reseiver which is no problem, right?

0.07sec60degree and 8.2kg.cm (6V)

原帖由 volvo9 於 2006-2-9 11:03 AM 發表
0.07sec60degree and 8.2kg.cm (6V)

Thanks for your help

Due to WR servo is developed in 2001 before. So i tell you that it "may be" use only.

原帖由 volvo9 於 2006-2-9 11:14 AM 發表
Due to WR servo is developed in 2001 before. So i tell you that it "may be" use only.

so, if I use 2143 and 2344, they must can use on the HRS?

and I have a last question, what is ko's 2174 spec.?  Thanks

[ 本帖最後由 mark999hk 於 2006-2-9 11:24 編輯 ]