3PK壞咗可以去到修理呀

一年唔夠無單

謝謝

send 個 mail 去 futaba ( japan / usa ) 問下可唔可以 send 返去整 ?

甘搞法..可以買過支新3PK了..

寄過去來回都4,5百蚊，又要等幾個月，仲未計人工零件
買過支新把啦

你可以拆d軚跌, 個d 出來sell sell 佢既, 都值唔少$....
之後再買過支3pk, 一係try try ex10/m11

點壞法呀?

開機無反應呀

嘩,我正想買支,多謝堤點

原帖由 peugeot206 於 2006-12-13 13:09 發表
一年唔夠無單

謝謝

If I have this problem , I will go to the RC shop which I bought the 3pk, to see what is my next step.  I think Futuba is a big company, they should responsible for all the after sales service.  

Many years ago, if I have any problem, I will bring to Radar Shop, they will mail it to Japan for service and mail back, the charge was very reasonable, sometimes they just changed to a brand new one for you.

原帖由 gibson 於 2006-12-13 17:40 發表



If I have this problem , I will go to the RC shop which I bought the 3pk, to see what is my next step.  I think Futuba is a big company, they should responsible for all the after sales servi ...

佢地只會收番運費.

問咗Radar, 等夠其它壞parts一次過運+維修 至少三個星期。運費$100-$200
獨立運速遞+維修約兩星期左右。
維修費另計

原帖由 peugeot206 於 2006-12-13 19:50 發表
問咗Radar, 等夠其它壞parts一次過運+維修 至少三個星期。運費$100-$200
獨立運速遞+維修約兩星期左右。
維修費另計

Futaba made tons of 3PK and 3PKS in the market, of course few of them may had defect.  Even porsche and Ferrari also had Friday cars.   If I were you, I will go ahead to send it to repair.....you may gain experience of Futaba how to repair your 3pk....   
Around 18 years ago, my 9 channels pcm receiver was demaged, at that time, the pcm was quite new in the market, I sent it to Japan, in return, they sent me a brand new one........ caused me HKD36.  mailing charge....  one and a half month...  by surface.....

原帖由 gibson 於 2006-12-13 19:57 發表


Futaba made tons of 3PK and 3PKS in the market, of course few of them may had defect.  Even porsche and Ferrari also had Friday cars.   If I were you, I will go ahead to send it to repair..... ...

that means at that time Futaba was not able to repair your 9 ch pcm..........so they send you a new set instead......no other better method.......

原帖由 minimini 於 2006-12-13 20:01 發表


that means at that time Futaba was not able to repair your 9 ch pcm..........so they send you a new set instead......no other better method.......

May be too difficult to fix, Its still working fine in my M04.  

                               
登錄/註冊後可看大圖

羅去偉高佢會幫你寄返廠整，只收運費約百多元，約三個月~