RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

 找回密碼
 新玩家註冊
搜索
查看: 3267|回復: 17
收起左側

Building Mi5, step 8 and 17B are so interesting...

[複製鏈接]
RGear 發表於 2013-5-27 11:11:15 | 顯示全部樓層 |閱讀模式

遊客登錄

您需要 登錄 才可以下載或查看,沒有帳號?新玩家註冊

x
Just finished Step 17B, found that the step 8 and 17B, would like to share my experience for other Mi5 owner:
1) Step 8: add moly grease between the gear and the plastic ring, place the ring on table, and push the gear down
2) Step 17B, the O-ring between output and slider:
- also add moly grease
- Most important step is move  the 10x15x4 ball bearing outward little bit, as stopper to keep the O-ring stay at the slot, then push the slider inside.

evooo 發表於 2013-5-27 11:49:54 | 顯示全部樓層
bother i didn't add grease on either step,

i did the same as u on step 17b,

for step 8 i just push it with a flat metal object  with the gear on the ground it snap together very easy

evooo 發表於 2013-5-27 11:50:28 | 顯示全部樓層
u got to say it is easy to assemble,  because all the parts are labeled as steps
evooo 發表於 2013-5-27 11:50:58 | 顯示全部樓層
btw mine is done, just i need to find a matching motor pinion
 樓主| RGear 發表於 2013-5-27 16:03:33 | 顯示全部樓層
My Mi5 is completed too, will use 22T 48P pinion, 7.5T motor for preliminary testing :>
teamlosi 發表於 2013-5-27 20:51:12 | 顯示全部樓層
hi how did you done the step 17b did you use some tools to push the slider??or just hand can done??
i already pull the bearing out a bit.....but can't to push the slider...thx
teamlosi 發表於 2013-5-27 21:49:48 | 顯示全部樓層
okok finish
 樓主| RGear 發表於 2013-5-30 17:02:11 | 顯示全部樓層
Added a battery holder of 411
IMG_2810.JPG
IMG_2802.JPG

Use 411's battery holder

Use 411's battery holder

Drill a hole to hold the screw as stopper

Drill a hole to hold the screw as stopper
IMG_2807.JPG
teamlosi 發表於 2013-5-30 19:31:50 | 顯示全部樓層
三節棍用邊隻啊..
thx
kyoshozx5 發表於 2013-5-30 22:51:35 | 顯示全部樓層
Spec r 幫schumacher 出。要$500一對
比利羊 發表於 2013-5-30 23:57:49 | 顯示全部樓層
$500一對
 樓主| RGear 發表於 2013-5-31 09:24:08 | 顯示全部樓層
sean2012 發表於 2013-5-31 10:22:50 | 顯示全部樓層
ching where is amain?
 樓主| RGear 發表於 2013-5-31 11:03:05 | 顯示全部樓層
Amainhobbies.com, on-line shop. But the discount for special day passed, price back to $500 now
teamlosi 發表於 2013-6-2 12:24:46 來自手機 | 顯示全部樓層
其他牌子可裝上嗎。。如vbc 媽星。。
 樓主| RGear 發表於 2013-6-3 11:48:46 | 顯示全部樓層
teamlosi 發表於 2013-6-2 12:24
其他牌子可裝上嗎。。如vbc 媽星。。

Didn't check, I also want to know
lung1 發表於 2013-6-3 20:36:39 | 顯示全部樓層
本帖最後由 lung1 於 2013-6-3 22:33 編輯

DIY 皮帶頂
5x10bearing + servo mount

                               
登錄/註冊後可看大圖

teamlosi 發表於 2013-6-3 22:12:30 | 顯示全部樓層
lung1 發表於 2013-6-3 20:36
5x10bearing + servo mount

thanks share
您需要登錄後才可以回帖 登錄 | 新玩家註冊

本版積分規則

手機版|小黑屋|RC EVOLUTION - 遙控工房

GMT+8, 2021-6-15 16:54 , Processed in 0.069921 second(s), 18 queries , Gzip On.

Powered by Discuz! X3.2

JKNET CDN | © 2001-2013 Comsenz Inc.

快速回復 返回頂部 返回列表