RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

 找回密碼
 新玩家註冊
搜索
查看: 3871|回復: 20
收起左側

questions on esc short course.. ae sc10 4x4 factory team kit

[複製鏈接]
hhxhkuroro 發表於 2013-2-22 18:47:59 | 顯示全部樓層 |閱讀模式

遊客登錄

您需要 登錄 才可以下載或查看,沒有帳號?新玩家註冊

x
hello i have few questions.
1 short course 1/10 size is same as 1/8 buggy suppose to use 1/8 esc motor or 1/10?

2 can i use the 1/8 buggy power on the sc10 4x4 the kv is around 2000, but i see most sct motors are 4000 kv?

3 the car is 2 cell power i feel like not enough power.


4 for the hobby wing 150a rx8 ix8 is it okay to use 2 cell?

5  i bought the lrp ix8 with 2200kv combo can i use it on the car?

ae ballcups are very hard....
fr888 發表於 2013-2-23 00:34:10 | 顯示全部樓層
1. Best to use sc esc motor combos, e.g. hobbywing sct-pro

2. Bcos sct motors are 7.4v

3. No, there are 4-pole sct motors, which are very powerful, but you'll need good lipo

4. I suggest to use sct-pro for esc, rx8 is ok for 2-cell, 150a or ix8 not too sure...

5. Not sure if the 1:8 motor can fit on the sc10 4x4...
ftbingobingo 發表於 2013-2-23 01:56:24 | 顯示全部樓層
1. You can choose between 1/8 and 1/10 ESCs, but with 1/10 ESCs, the gearing and setting must be very careful.

2. Seems 1/8 motor is too long for SC10 4x4, the around 2000kV motor for 1/8 will only provide "normal" speed when using 4S LiPo. Also seems it is hard to fit 4S LiPo to most Short Course Trrucks in the market, except SC8e.

3. As mentioned before, you have to using higher kV motor to have sensible speed when you are using lower voltage input.

4. All ok, but sometimes you may experience BEC problem when using 7.4V with Hobbywing 150A.

5. 1/8 motor seems not fit SC10 4x4, if you use iX8, I suggest LRP X12L 4.5T
 樓主| hhxhkuroro 發表於 2013-2-23 17:16:11 | 顯示全部樓層

thank you ching.. is the x12l 4.5t too much kv for the car? i have a 4.5 6000kv motor but not sure if it works. it is usually for touring.
 樓主| hhxhkuroro 發表於 2013-2-23 17:17:58 | 顯示全部樓層
fr888 發表於 2013-2-23 00:34
1. Best to use sc esc motor combos, e.g. hobbywing sct-pro

2. Bcos sct motors are 7.4v

thank you do you think is 6000mah 30c and 4400mah 40c and 30c okay?
ftbingobingo 發表於 2013-2-23 18:23:50 | 顯示全部樓層
hhxhkuroro 發表於 2013-2-23 17:16
thank you ching.. is the x12l 4.5t too much kv for the car? i have a 4.5 6000kv motor but not sure ...

It will be very slow and high chance of overheating for normal 540 motors, X12L is 550 motor
ftbingobingo 發表於 2013-2-23 18:24:05 | 顯示全部樓層
hhxhkuroro 發表於 2013-2-23 17:17
thank you do you think is 6000mah 30c and 4400mah 40c and 30c okay?

Better to go above 50C
fr888 發表於 2013-2-24 00:20:48 | 顯示全部樓層
hhxhkuroro 發表於 2013-2-23 17:17
thank you do you think is 6000mah 30c and 4400mah 40c and 30c okay?

Not okay... The 550 or 4-pole motor will kill your batt...
 樓主| hhxhkuroro 發表於 2013-2-24 14:40:30 | 顯示全部樓層
ftbingobingo 發表於 2013-2-23 18:24
Better to go above 50C

50c battery how much??
 樓主| hhxhkuroro 發表於 2013-2-24 14:41:37 | 顯示全部樓層
fr888 發表於 2013-2-24 00:20
Not okay... The 550 or 4-pole motor will kill your batt...

battery so expensive ..... how long do they last?
 樓主| hhxhkuroro 發表於 2013-2-24 15:14:08 | 顯示全部樓層
ftbingobingo 發表於 2013-2-23 18:23
It will be very slow and high chance of overheating for normal 540 motors, X12L is 550 motor

X12L 4.5 5.0 5.5 or 6.5kv?
ftbingobingo 發表於 2013-2-24 16:57:19 來自手機 | 顯示全部樓層
4.5 is suitable
ftbingobingo 發表於 2013-2-24 16:59:31 | 顯示全部樓層
hhxhkuroro 發表於 2013-2-24 14:40
50c battery how much??

Depends on brand, normally around $400-500
fr888 發表於 2013-2-25 11:16:37 | 顯示全部樓層
hhxhkuroro 發表於 2013-2-24 14:41
battery so expensive ..... how long do they last?

Buying a good batt and maintain well can last very long... On the other hand if buy cheap batt will last very short and in turn lost $$$...
 樓主| hhxhkuroro 發表於 2013-2-25 11:50:06 | 顯示全部樓層
ftbingobingo 發表於 2013-2-24 16:59
Depends on brand, normally around $400-500

u know anyone use tekin pro4 motor? how is it
 樓主| hhxhkuroro 發表於 2013-2-25 11:50:36 | 顯示全部樓層
fr888 發表於 2013-2-25 11:16
Buying a good batt and maintain well can last very long... On the other hand if buy cheap batt wil ...

oo..do u think gen ace is okay?what brand do you use
fr888 發表於 2013-2-25 11:56:46 | 顯示全部樓層
hhxhkuroro 發表於 2013-2-25 11:50
oo..do u think gen ace is okay?what brand do you use

I currently have Revtech 6900mah 100C and Zombie 7200mah 75C for short course use, both seems quite OK to me
mr03 發表於 2013-2-25 12:58:19 | 顯示全部樓層
Tekin has the best products that you can find
ftbingobingo 發表於 2013-2-25 13:36:58 | 顯示全部樓層
hhxhkuroro 發表於 2013-2-25 11:50
u know anyone use tekin pro4 motor? how is it

I think not bad, but you may need a Tekin or Hobbywing ESC, LRP seems has false temp cut problem when not running with LRP motors
965 發表於 2013-2-25 17:30:37 | 顯示全部樓層
You can use 1/8 esc, but there is limited space for sc10 4x4, RX8 or Mamba pro those smaller size 1/8 esc will fit, but something like mamba monster or hobbywing 150A may not fit well.

For motor, again, with limited space, SC10 4x4 won't take 40or 42mm 1/8 motor, but 36 mm 540 or 550, I guess 65mm length max. The reason why most people use 4000kv is for race with 2s, if you set your SC10 4x4 to fit 3s battery, (straight pack battery fitment) you can run some 3000kv range motor too.

For running 2s, hobbywing 120a esc is good and small (can run 3s too) but you may need bec if you run high power servo, I hv no experience with rx8 on 2s, I guess it is ok, if you like tekin, you can choose RS pro instead of rx8, with size advantage.
您需要登錄後才可以回帖 登錄 | 新玩家註冊

本版積分規則

手機版|小黑屋|RC EVOLUTION - 遙控工房

GMT+8, 2024-3-29 21:26 , Processed in 0.044012 second(s), 15 queries , Gzip On.

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回復 返回頂部 返回列表