RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

 找回密碼
 新玩家註冊
搜索
查看: 3599|回復: 20
收起左側

請教1/8電buggy

[複製鏈接]
Edwin 發表於 2013-1-24 22:18:16 | 顯示全部樓層 |閱讀模式

遊客登錄

您需要 登錄 才可以下載或查看,沒有帳號?新玩家註冊

x
小弟想買一架1/8電buggy,請各師兄介紹一款可以嗎?謝謝
mansiu 發表於 2013-1-24 22:45:45 | 顯示全部樓層
GSXR600 發表於 2013-1-24 22:59:09 | 顯示全部樓層
平玩開始可玩T8E 買部2手跟一跟去玩 都ok
有budget 阿蘇屎 8.2e 幾正 我玩過人地過部 真係唔同d 重心 d彎靚 好操控
811 朋友果部 好多小問題 個人覺得易爛野
SCOTT 發表於 2013-1-25 00:03:47 | 顯示全部樓層
HPI Vorza Flux 都好堅,硬正.
http://www.youtube.com/watch?v=JDy2RN0hLko
benlau 發表於 2013-1-25 00:22:03 | 顯示全部樓層
HN X3e $2180 平靚正
BigCat 發表於 2013-1-25 02:18:29 | 顯示全部樓層
Hong nor  X3e 合新手玩
 樓主| Edwin 發表於 2013-1-25 03:18:44 | 顯示全部樓層
多謝各師兄回覆。如果三選一,Asso 8.2e , Serpent 811e 和 Durango 408, 首選是否Asso? 唔該哂!
小咪咪 發表於 2013-1-25 07:55:34 | 顯示全部樓層
Ae8.2e買了司兄不後悔
kay1926 發表於 2013-1-25 09:18:51 | 顯示全部樓層
本帖最後由 kay1926 於 2013-1-25 09:20 編輯


個人意見,3 部都係好車 , 先抉條件係 parts 容吾容易 buy 到先真
無零件buy . 比架世界賽冠軍你玩都無用。
euro614 發表於 2013-1-25 11:26:14 | 顯示全部樓層
本帖最後由 euro614 於 2013-1-25 13:45 編輯

性價比:
8.2e齊Option,最多都係換金屬波箱撐。另兩架應該有唔少OP要加,當然可以咩都唔加,都行得。
設計/外型:
8.2e經歷多代改善,但始終都係舊設計(正因為舊設計,操控/性能得以保証),同樣因為舊設計,所以外型就見仁見智。反觀另兩部,佈局/設計新,外型靚。新佈局設計對操控/性能有無改進,就留待其它擁有過的師兄解答,我只玩過一兩次,不便多說。

以上小弟個人意見,不喜請插。
RGear 發表於 2013-1-25 13:38:13 | 顯示全部樓層
8.2e, parts 只可online shop買, 而且佈局係油鷄直接改成的, 不是專為Lipo電設計.
ralphli 發表於 2013-1-25 16:12:56 | 顯示全部樓層
Tekno 都好好揸又硬淨,月野倉大把Parts買到,不過架車就貴D,自己諗(我個人認為)
RCANDY 發表於 2013-1-25 16:19:32 | 顯示全部樓層
benlau 發表於 2013-1-25 00:22
HN X3e $2180 平靚正

Yes, X3e good for new beginner like me
fr888 發表於 2013-1-26 00:13:30 來自手機 | 顯示全部樓層
I have both 811e and 8.2e, imho the snake is more durable, but better change the front tower to alu. 8.2e cvd can be easily bent, but can be easily fixed also with a hammer... Control wise both cars can turn very well, but the snake can be quite pushy with factory setting... But the snake has lower center of gravity bcos the batteries are lay flat

If i have to choose one now i will choose the snake just bcos i need much less time to maintain the car...
DK666 發表於 2013-1-26 10:53:54 | 顯示全部樓層
If you are willing to pay the greens, then get the DEX408....personally I really like that 1/8 Buggy.
P1010017 (Medium).JPG
P1000966 (Medium).JPG
 樓主| Edwin 發表於 2013-1-27 02:16:00 | 顯示全部樓層
Finally get a Serpent 811!! Thank you for all C Hings advise!
 樓主| Edwin 發表於 2013-1-27 02:51:24 | 顯示全部樓層
本帖最後由 Edwin 於 2013-1-27 03:09 編輯

Chings please kindly give me tips to build this car if possible, Thank you very much!!
1359225981457.jpg
1359226026058.jpg
965 發表於 2013-1-27 15:56:36 | 顯示全部樓層
本帖最後由 965 於 2013-1-27 15:58 編輯

Bravo! I think the 811 is the very best one, especially in HK, I have my eyes on 811 for  a long time, (I am in Canada) but 811 is by far the most expensive one here, way more then 8.2e (almost double) also more expensive then Tekno, Megun and Durango. However, Serpent price in HK is so good, less then 8.2, 408 etc etc .....  

I ended up bought TWO 811 last month in HK, cost me the same to buy just ONE here! (One pro, one sport as spare)

( C hing, your servo is very GING wor..)


rcworldhk 發表於 2013-1-28 00:10:40 | 顯示全部樓層
Edwin 發表於 2013-1-27 02:51
Chings please kindly give me tips to build this car if possible, Thank you very much!!

Good selection
照片.jpg
tkmshyq 發表於 2013-1-30 10:09:53 | 顯示全部樓層
811 絕對是輛好車
您需要登錄後才可以回帖 登錄 | 新玩家註冊

本版積分規則

手機版|小黑屋|RC EVOLUTION - 遙控工房

GMT+8, 2024-3-28 20:07 , Processed in 0.050482 second(s), 18 queries , Gzip On.

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回復 返回頂部 返回列表