RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

 找回密碼
 新玩家註冊
搜索
查看: 16582|回復: 67
收起左側

HUGE FF 車系玩家專區

[複製鏈接]
Roche 發表於 2012-12-21 23:27:16 | 顯示全部樓層 |閱讀模式
carven.chow 發表於 2012-12-21 23:28:27 | 顯示全部樓層
Great FF12!
lung1 發表於 2012-12-21 23:41:52 | 顯示全部樓層
Nice!
f-16 發表於 2012-12-21 23:42:04 | 顯示全部樓層
VBC代工??

用晒VBC D野既?
MATHEWCAT 發表於 2012-12-21 23:44:29 | 顯示全部樓層
 樓主| Roche 發表於 2012-12-21 23:48:51 | 顯示全部樓層
allan007_alive 發表於 2012-12-22 00:17:17 | 顯示全部樓層
Roche 發表於 2012-12-21 23:48
HUGE採用了VBC縣掛系统產品, 性能及效果理想。

咁請問用唔用得番孖星料?
maomao1 發表於 2012-12-22 00:19:17 | 顯示全部樓層
幾時有貨?
smallwhite1234 發表於 2012-12-22 00:22:44 | 顯示全部樓層
千呼萬喚 !!
 樓主| Roche 發表於 2012-12-22 00:29:21 | 顯示全部樓層
allan007_alive 發表於 2012-12-22 00:17
咁請問用唔用得番孖星料?

可以! 但中間分體碼要用VBC, 其他懸掛零件可用双星, 萬骨要用VBC或Xray, 因配合牙差杯及3.5mm馬蹄膠
 樓主| Roche 發表於 2012-12-22 00:31:08 | 顯示全部樓層

希望在1月2號送出廣華街  Thanks
 樓主| Roche 發表於 2012-12-22 00:32:23 | 顯示全部樓層
smallwhite1234 發表於 2012-12-22 00:22
千呼萬喚 !!

LIKE!
allan007_alive 發表於 2012-12-22 00:32:38 | 顯示全部樓層
Roche 發表於 2012-12-22 00:29
可以! 但中間分體碼要用VBC, 其他懸掛零件可用双星, 萬骨要用VBC或Xray, 因配合牙差杯及3.5mm馬蹄膠
...

正!幾時有得賣呀
 樓主| Roche 發表於 2012-12-22 00:47:49 | 顯示全部樓層
allan007_alive 發表於 2012-12-22 00:32
正!幾時有得賣呀?

一月初  
 樓主| Roche 發表於 2012-12-22 00:53:02 | 顯示全部樓層

Congrat! FF class winner
terrykan 發表於 2012-12-22 06:57:04 | 顯示全部樓層
有無Kit買?定係成架買架?
spring 發表於 2012-12-22 07:00:49 來自手機 | 顯示全部樓層
快..........
 樓主| Roche 發表於 2012-12-22 09:39:26 | 顯示全部樓層
terrykan 發表於 2012-12-22 06:57
有無Kit買?定係成架買架?

Hi, 暫時HUGE會成架車出, 車價錢是二仟中, 比FF11平好多。Conversion kit會遲d考慮, 要看看市場需求而定。多謝支持!
 樓主| Roche 發表於 2012-12-22 23:30:27 | 顯示全部樓層
More update details ......
Features :
New design 2.5mm graphite main chassis, 2.0mm upper deck, 3.5mm front & rear damper mount. Improved the chassis flex, more corner speed, more traction, more stability.
Re-position motor mount, battery, servo and r/c equirpment. Low CG chassis design.
Belt driven with gear differential tranmission, internal gear ratio 2.4375. 16T 7075-T6 hard coated belt pulley. Tamiya FF03 gear tranmission is changeable.
3.5mm low friction universal joint connectors.
Floating style servo mount system. More balance on chassis.
New double arm aluminum steering system. More mild on cornering.
Hard composite suspension arm, c-hub, steering knuckle and rear upright.
High quality aluminum damper set.
High quality aluminum front and rear suspension arm mounts.
Front and rear anti-roll bar set.
Aluminum front bumper support and air flow design plastic front bumper for more motor cooling.
7075-T6 aluminum turnbuckle set.
Full rubber sealed ball bearing set.

RC2_0682.jpg


RC2_0683.jpg


RC2_0685.jpg


RC2_0689-e.jpg


RC2_0690-e.jpg


RC2_0692.jpg


RC2_0699.jpg


RC2_0700.jpg


RC2_0703.jpg


RC2_0709.jpg


RC2_0713.jpg


RC2_0721.jpg


RC2_0726.jpg


RC2_0728.jpg


RC2_0730.jpg


RC2_0748.jpg


RC2_0755.jpg



kenanakee 發表於 2012-12-23 00:39:14 | 顯示全部樓層
Roche 發表於 2012-12-22 23:30
More update details ......
Features :
New design 2.5mm graphite main chassis, 2.0mm upper deck, 3.5m ...

good price with great design~
must buy item~
您需要登錄後才可以回帖 登錄 | 新玩家註冊

本版積分規則

手機版|小黑屋|RC EVOLUTION - 遙控工房

GMT+8, 2019-9-20 04:49 , Processed in 0.098524 second(s), 18 queries , Gzip On.

Powered by Discuz! X3.2

JKNET CDN | © 2001-2013 Comsenz Inc.

快速回復 返回頂部 返回列表