T8e problem. 特別鳴謝TeamC員工快促更換服務

the problem is solved, thx for team c good after sale service.

回復 RCANDY 的帖子

too bad! I don't have this issue. My problem is the front drive shaft is bended and one screw is missing. You can ask the distributor to replace a new one.

回復 RCANDY 的帖子

can you identify which part is wrong fitting? chassis or arm mount?

回復 samsonl 的帖子

thx, I'm the lucky person.

回復 samsonl 的帖子

no idea

Oh, bad news.... I am working on my t8e too, can you tell me which step are you on? I want to check whether I have the same issue as you do, thx~!

揾個除仔–野卜落去就ok啦

會唔會裝左埋波箱後上底螺絲時扯佢落底板呢?

實 blo……實blo……

fung2010 發表於 2012-6-24 02:15

                               
登錄/註冊後可看大圖

揾個除仔–野卜落去就ok啦

wow is that the team C installation style?

回復 RCANDY 的帖子

bringtwo parts to distributor and ask for solution.

回復 RCANDY 的帖子

last week end I spent whole day to finish it because  I have to known any further problem is coming.

回復 101ROADBAR 的帖子

the QC is not good enough.

Yes will bring them back for solution.....but waste time.

If QC can improve, actually this car is not bad

samsonl 發表於 2012-6-24 08:09

                               
登錄/註冊後可看大圖

回復 101ROADBAR 的帖子

the QC is not good enough.

what? do you still believe they have the qc?

ching 我覺得乜都晤好裝羅反去舖換反 , 正常安裝組件要diy先裝到根本不能接受 , 晤系個個ching 都能手作仔裝車 ! 應該teamc 回應下post 等樓主ching 的問題再作解決 , 你做得車廠一定要承擔反車仔品質問題 ! 負面消息太多只會減少人買teamc , 以上說話只屬個人意見 thx

回復 siuwai999999 的帖子

thx, c hing.

RCANDY 發表於 2012-6-24 00:47

                               
登錄/註冊後可看大圖

the front arm mount can't fit in the chassis, is it a normal case.
at least have 1mm different to f ...

有問題,你可以拿回去舖換.

回復 alexserpent 的帖子

thx, c hing