本帖最後由 chacha 於 2011-2-13 23:38 編輯
LRP Pulsar Touch Competition System 
http://www.lrp.cc/en/products/ch ... ion-system/details/
最怕你唔識貨, 睇片後你先勁嘢, 唔使多講, 唔使睇下面,而價錢大約是$14xx-1550 左右
CHARGE LiPo - LiFePo - NiMh - NiCd
‧ Adjustable fast charge from 0.1 to 12.0A
1-4 cells LiPo/LiFePo with automatic (LiPo/LiFePo) cut-off
1-8 cells (NiMH/NiCd) with adjustable Delta-Peak detection, linear or optional 5-step charge mode.
(charging with variable current steps)
‧ Autostart-Timer for maximum comfort
‧ Storage Mode: The battery is charged/discharged automatically for longest cell lifetime
CYCLE LiPo - LiFePo - NiMh - NiCd
‧ Automatic Cycling Mode (Discharge - Charge - Discharge) for perfect conditioning of your batteries.
DISCHARGE LiPo - LiFePo - NiMh - NiCd
‧ Adjustable high-power discharge current (up to 20.0A) and cut-off voltage to perfectly match your batteries.
* Touch screen Graphic Display, blue backlit
* Integrated LiPo/LiFePo Balancer: The Balancer is specially developed for the use with LiPo and LiFePo batteries. It automatically detects cell condition for all 2- up to 4 cell batteries. If the difference between the cells is more than 5mV, the balancing starts automatically.
* Brushless motor sensor port: for sensor check and rpm measurement
* Receiver simulator port: for function check of speed controls and servos
* Fully Adjustable: Intuitive program structure with graphical user interface, allows precise adjustment of all parameters
* User Profile Memory: 5 factory pre-set profiles which can be customised, renamed and saved in memory
* USB connection (wire included): for data download to PC and firmware update
* Microprocessor controlled: Fully adjustable for perfect operation, maximum performance and highest safety
* Multi Protection System: 100% protection against output reverse polarity, short circuit, input voltage error and over charge.
* Voltage calibration for maximum accuracy
* DC Input 11-15V |
[複製鏈接]
收藏
勁正
嬲嬲
樓主
