Program Card 如何 Setting

有無SETTING PROGRAM CARD 教學 , 如何可使車輛發揮最好性能.

你玩咩先????????

for Tamiya 416x ,TOP Speed mode: 3.5T Ezrun motor hobby wing XERUN-120A
Towerpro 996R servo, Futaba 4pk control.
60C Silverback battery LIPO
24 degree Sorex tire
racing JV (CHOI HUNG) at 18 degree temp with sun light time 15:00 Sat.
15 car on the road

ref only:
1. Mode: Forward and Reverse and have Brake
2.（Drag Brake Force）用10%
3.（Low Voltage Cutoff Threshold）應該用2.8V
4.（DRRS）PUNCH 用 4 LEVEL
5.（Brake Force）用50%
6.（Reverse Force）用20%
7.（Initial Brake Force）用0%
8.（Neutral Range）用6%
9.(Boost Timing) 用18數字
10.(Over Heat protection) 用
12.(Turbo Level) NO NEED
13.(Start RPM) 用6000轉數 or 7500 轉數 (在魔打轉到 6000rpm 先會加 boost.)
14.(Turbo Delay) NO NEED
15.（Timing Punch）用1000

Boost Timing進角開18度就很猛了
沒玩競速根本用不到TURBO

有無SETTING PROGRAM CARD 教學 , 如何可使車輛發揮最好性能.
cyberkohk 發表於 2010-12-26 12:33

                               
登錄/註冊後可看大圖

Ask Andy Lam mobile number and alway contact him.

3.5t still need turbo? Just use 205_MOD la, and gear accordingly.

如果你係新手...首先你買返個高t魔打先

for Tamiya 416x ,TOP Speed mode: 3.5T Ezrun motor hobby wing XERUN-120A
Towerpro 996R servo, Futaba ...
greenracing83 發表於 3/1/2011 11:15 AM

                               
登錄/註冊後可看大圖

li-po, 3.2V是底線

Boost Timing 有咩用唔係好明?