SXX v2 setting

Hello Ching

It would be great if you could share your setting of the SXX v2 for playing your 12 son. Thanks ^^

For example, 1730

I find 1720 better

回復 2# billlkyy

   Thanks bill. ^^

回復 2# billlkyy


    Btw, what is the temp on your v2 and 4.0T?

回復 4# mikuro


    Esc around 65-68 motor 55-68

Motor 55-58

回復 6# billlkyy


    Thanks ^^
    Btw, can you tell me how to read the temp from the ESC ?
    Last night, after a few laps, I have tried following the instruction manual to temp the ESC and motor and it showed only 1 flash at a time. Referring to the manual, is it mean that it is around 45 DC (not sure the -ve sign means).

    When I have touched the ESC and motor, they are cool. Please advise.

回復 7# mikuro


    45 or more ，I just buy hobbywing 1s esc without program card but can't set other mode on the set button，anyone know ?

回復 8# billlkyy


    How much is it?

$820!!!!

I find 1720 better
billlkyy 發表於 2010-11-19 11:33

                               
登錄/註冊後可看大圖

ching,我系trc試sxx set 1730, x-11 4t, 21/98, 44mm尾呔, 50c 5600mah电,但系个电變唔爆, d ching用過都話sxx唔爆,你覺得爆嗎?

我叻banned}2 4t

打錯了，是叻banned}2 4t的

回復 11# winclearly

Seems you can try a lower gear ratio, e.g 24/96 ^^
Btw, did you check with the gear ratio that most Ching set when playing at TRC?

ching,我下次試試,thx

SXX Ver2,  請問你們點樣set mode? yellow/ red/ both yellow and red?
any different?

回復 16# wingscreamer


For SXX ver 2, you have to set mode by mode.  

Press the "mode" button for at least 3 second until it starts to flash.
   
For mode 1, if you are using 1-cell lipo, the setting is #1 so you have press the "set" button only 1 blue light flash only in mode 1. If you are using 2-cell lipo, the setting is #2 so that you have to press the "set" botton 1 more time and there should be 2 blue light flash in mode 1, vice and versa.

When you finished setting in mode 1, press "mode" button again to change to mode 2.
Taking an example, if you want to set the throttle feel to linear, ie. #7, you have to press the "set" button several times until there are 7 blue flashes. Once finished, press "set" button again and then switch to mode 3.

Make sure you have to press the "set" button after mode 4, there will be only 1 solid blue light in the "mode" light which means setting mode finished. ^^

For further details, please refer to the SXX ver2 manual.

Thanks for your kind help ching, let me trytry!

回復 18# wingscreamer

Unlike HW / SP ESC that they are more user-friendly since it can be easily done by using the setting card, luckily the SXX v2 only got 4 modes. ^^

Thanks all Ching, I did it but my Sxx mode setting is mode 2 at #7 and mode 3 at #5,
will it be easy to burn or damage? please help to advise..!