RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

 找回密碼
 新玩家註冊
搜索
查看: 2204|回復: 8
收起左側

updated OS engine v-one RRR problems. please help

[複製鏈接]
hhxhkuroro 發表於 2010-10-22 17:43:32 | 顯示全部樓層 |閱讀模式

遊客登錄

您需要 登錄 才可以下載或查看,沒有帳號?新玩家註冊

x
本帖最後由 hhxhkuroro 於 2010-10-23 17:38 編輯

ching i bought a used OS max 12tz engine with a v-one rrr but on the engine i don't know the factory setting. any body know that can tell me the needle setting for OS engine. i have 3 needles and a idle screw in Carburetor 化油器.



我是新來的手。我不想使用昂貴的引擎。這種發動機是v-one rrr 可用的...... Ofna Jammin .12
http://www.amainhobbies.com/prod ... n-Pull-Start-Engine
Fluke 發表於 2010-10-22 22:50:10 | 顯示全部樓層
本帖最後由 Fluke 於 2010-10-22 22:51 編輯

http://www.osengines.com/manuals/index.html

click 12TZ
page 18~20
 樓主| hhxhkuroro 發表於 2010-10-23 01:30:01 | 顯示全部樓層
回復 2# Fluke


  ching i found that already... but that doesn't say how many turn is the screw........ it only say flat to the body,.
 樓主| hhxhkuroro 發表於 2010-10-23 01:30:35 | 顯示全部樓層
回復 2# Fluke


  ching i found that already... but that doesn't say how many turn is the screw........ it only say flat to the body,.
 樓主| hhxhkuroro 發表於 2010-10-23 17:41:43 | 顯示全部樓層
help please.....
beebone 發表於 2010-10-25 08:14:23 | 顯示全部樓層
Run and check the temperature, just ignore about the factory setting because AFM is too rich.
r003 發表於 2010-10-25 14:23:09 | 顯示全部樓層
High Speed Needle (HSN) 2 turns out from closed.

Low Speed Needle (LSN) close it fully (with carb open, so as not to damage the main jet), teh open it until it is flush with the slide body.

Main Jet Needle or Valve (MRN) has to be flush with carburator body, and leave it there and never touch it again.

Idle Speed Needle (ISN), close it until slide valve is open about 1mm, and then when engine has started and warmed enough readjust to a slow steady idle.
ul8000kbs 發表於 2010-10-26 01:13:42 | 顯示全部樓層
如果真係set到亂晒搞唔掂咪落kws刺激消費囉.............
Fluke 發表於 2010-10-26 18:39:10 | 顯示全部樓層
您需要登錄後才可以回帖 登錄 | 新玩家註冊

本版積分規則

手機版|小黑屋|RC EVOLUTION - 遙控工房

GMT+8, 2024-3-29 21:40 , Processed in 0.058178 second(s), 16 queries , Gzip On.

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回復 返回頂部 返回列表