RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

 找回密碼
 新玩家註冊
搜索
查看: 1668|回復: 7
打印 上一主題 下一主題
收起左側

3、7v升壓問題

[複製鏈接]
跳轉到指定樓層
1#
空降兵 發表於 2010-10-14 22:54:25 | 只看該作者 回帖獎勵 |倒序瀏覽 |閱讀模式

遊客登錄

您需要 登錄 才可以下載或查看,沒有帳號?新玩家註冊

x
Novak Smart Boost 1-cell Li-Po Step-up Module

Novak Smart Boost 1-cell Li-Po Step-up Module一
請問有左以上用品就可以用3。7v电升压比接收电娈及司伏
2#
trainer 發表於 2010-10-14 22:58:18 | 只看該作者
Yes, u are right.
3#
jf813 發表於 2010-10-14 22:58:58 | 只看該作者
yap, boost from 3.7v to 6v.
4#
 樓主| 空降兵 發表於 2010-10-14 23:33:07 | 只看該作者
多謝師兄
5#
GigaRacer 發表於 2010-10-15 02:37:45 | 只看該作者
本帖最後由 GigaRacer 於 2010-10-14 10:38 編輯

or use this.  micro 7.4v Lipo receiver battery.
6#
3rock3rock 發表於 2010-10-15 06:30:32 | 只看該作者
7.4V?
Is it too high in voltage
Life 6.6v is better wor
7#
jf813 發表於 2010-10-15 09:38:30 | 只看該作者
If you use newer KO, Spektrum receiver you can use 7.4V 2S lipo directly.  (sorry not sure abut futaba and sanwa).  And don't forget to check the servo too as most servo donot accept 7.4v (only newer highend servo's do).  If your servo or receiver donot accept 7.4V you need to add a BEC to lower the voltage to 6V....
8#
hardmankam 發表於 2010-10-15 11:24:23 | 只看該作者


Agree, if use 7.4v Lipo, better to use BEC to lower to 6V.
I have used 6.6v Life Rx w/o BEC and it works perfectly.
(with KO receiver and Futaba servo)
您需要登錄後才可以回帖 登錄 | 新玩家註冊

本版積分規則

手機版|小黑屋|RC EVOLUTION - 遙控工房

GMT+8, 2024-4-26 07:51 , Processed in 0.101086 second(s), 18 queries , Gzip On.

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回復 返回頂部 返回列表