RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: del [打印本頁]

作者: pp123nn 時間: 2010-3-27 21:26
標題: del
本帖最後由 pp123nn 於 2011-1-8 19:43 編輯

http://www.youtube.com/watch?v=WoR85jye1sY&feature=related
請問那裡有得買.Losi 1/36 Micro HIGHroller.幾錢左右.
有無C兄提供下架車的資料.謝謝!

作者: GARY^^ 時間: 2010-3-30 21:20
鍵X有.. $8XX..

作者: SCOTT 時間: 2010-3-30 21:56
本帖最後由 SCOTT 於 2010-4-20 23:51 編輯

因為未試過改1/36,請問C兄.是用什麼款式無刷.要點改.謝謝!

作者: SCOTT 時間: 2010-4-20 23:53
鍵X有架1/18尺寸.2.4G是有刷版的用一般18仔7.2V電. $14XX

作者: ThomasZ 時間: 2010-8-8 13:45
回復 1# pp123nn

http://bbs.rc-evo.com/viewthread ... ;highlight=HIGHROLL

作者: wlwong228 時間: 2010-8-17 23:29
回復 5# ThomasZ

I FEEL INTERESTING IT, IS IT SOLD OR NOT? CAN IT BE CHEAPER?

作者: taikei 時間: 2010-11-7 19:27
本帖最後由 taikei 於 2010-11-7 19:28 編輯

please check:http://www.losi.com/Electronics/Motors_ESCs.aspx

or their OEM products : http://www.okhobby.com/category.php?id_category=102

因為未試過改1/36,請問C兄.是用什麼款式無刷.要點改.謝謝!
SCOTT 發表於 2010-3-30 21:56

登錄/註冊後可看大圖

: 登錄/註冊後可看大圖

作者: bennymok 時間: 2010-11-15 22:38
if you want to use the brushless esc+ motor. I stongly recommend the sold on
http://www.okhobby.com/product.php?id_product=1221.
It costs $250 hkd and i think that is the oem product of losi 1/36 como.
I replaced all stuffs for my 1/36 Micro T and It work very good especially the linear proportional control on throttle. please be aware on the servo since it's quite difficult to buy as welas the server saver.
As conclusion, let's try this product and you will happy on balance between price and it performance.
By the way, think about to buy together the fast setting card which is quite useful indeed.

作者: bennymok 時間: 2010-11-15 22:39
Sorry that it should be only 150hkd but not 250hkd as mentioned above. Sorry for typo error.

作者: reedy0605 時間: 2010-11-19 13:29
回復 2# GARY^^

好唔好玩

作者: bennymok 時間: 2010-11-19 18:33
Excellent!!!!!!!!!

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://www.rc-evo.com/xbbs/)