AWD Steering Problem

This is my friend's case:
He bought a New 2.4g AWD Chassis. (He use KT-18 for MR-02 normally.)

The first time he play, the car can turn left & right normally, BUT, once he steered KT-18 to the Left End, the car wheels will suddenly turn to right end. (This is the first time he play bor...)

He changed the harder body now & re-built the servo again, NOW, he steered Left the car turn right & vice versa.

We don't know the reasons & solutions. CHing please help. Thx.

just tell him to pair the car again and again, but don't press the pairing button on the car for too long.... it ill become correct after some trial.

the KT18 & ASF PCB has a servo reverse function which is not mentioned in the manual.

however, i dunno what exactly the combines are. i just know it happens when u do something during the pairing process (something more than what is needed)

Thanks 800mah,
For "repair the car again and again"...
Do you mean to take the servo gears out? or take the wires out? Or just pairing again & again?
Thx.

sorry for misleading u , i mean just pair the car to the KT18 again.

there's no need to take the car apart

I see! Thanks alot.
I will tell him to re-pairing it again until get back to normal!

For you #2
"the KT18 & ASF PCB has a servo reverse function which is not mentioned in the manual."
How does it be triggered ga ne...? How to avoid ne?

I guess he means pairing thr car and KT-18 again and again

I guess he means pairing the car and KT-18 again and again

I guess he means pairing the car and KT-18 again and again
2slow 發表於 2009-9-13 23:51

                               
登錄/註冊後可看大圖

Yes ar, I found out la, thanks!

For post #2
"the KT18 & ASF PCB has a servo reverse function which is not mentioned in the manual."
How does it be triggered ga ne...? How to avoid ne?

For post #2
"the KT18 & ASF PCB has a servo reverse function which is not mentioned in the manual."
How does it be triggered ga ne...? How to avoid ne?
Carsong 發表於 2009-9-14 06:24

                               
登錄/註冊後可看大圖

i'm not sure, i'll let u know when i find out.

btw, your frd's problem solved or not?

I told him la, haven't heard from him yet.

He tried at least 10 times, pairing again & again, still not work normal...
Anymore suggestions can try?
Thx.

唔關paring既事。
你朋友個問題係因為hold住個軑over trim 左或右就會出現，解決方法係擰住個軑去左或右，唔好放手，跟著按實個trim佢就會正常返。試試啦。

Thanks, I will tell him about this!

唔關paring既事。
你朋友個問題係因為hold住個軑over trim 左或右就會出現，解決方法係擰住個軑去左或右，唔好放手，跟著按實個trim佢就會正常返。試試啦。
Tim718 發表於 2009-9-15 14:27

                               
登錄/註冊後可看大圖

原來如此, 說明書又唔講, thanks

Haha, he just told me that he had fixed the steering problem, BUT NOW...
When Pulling the trigger, it becomes backward (which normally should be forward...) & vice versa.
Its the car playing him

Any suggestion for him? Thx.

It comes back suddently lor wor! Good for him!!

Do you think it is the problem of KT-18 or the PCB in the AWD?

It comes back suddently lor wor! Good for him!!
Carsong 發表於 2009-9-16 18:50

                               
登錄/註冊後可看大圖

i think throttle reverse is mentioned in the manual