分享下你架mini-z 呀

改左
___________________________
前珠差
全身bearing
前彈弓
前杯2度
狗骨
頭尺
金屬中軸
金屬中軸固定座
前金屬cover
金屬motor齒
金屬電cover
+FET
天線
金屬MOTOR COVER
STOCK R MOTOR
後KYOSHO珠差
後SAS

OK.
Here is one of mine.

嘩! 師兄, 架車好勁, 係唔係攞o左MR02個底黎改? 個頭改o左乜? 有冇多D相睇?

What motor you use?

Here are some more photos. Forgive the dust.

Other shots.

嘩! 師兄, 架車咁闊, 有乜殼啱裝?

原帖由 magiceye 於 2009-2-22 22:31 發表

                               
登錄/註冊後可看大圖

嘩! 師兄, 架車咁闊, 有乜殼啱裝?

I am using AE86.

原帖由 billy86che 於 2009-2-22 22:17 發表

                               
登錄/註冊後可看大圖

Other shots.

真係嘆為觀止 ，Billy兄我想問下你個kyosho 尾珠叉杯兩邊會唔會被狗骨整蝕？有無方法解決？

Check these.

呢位師兄真係好有心機,  連個殼都改得咁勁. 我都有個86殼, 因為裝唔到闊呔, 所以只用黎玩漂移.

原帖由 scalpel 於 2009-2-22 22:52 發表

                               
登錄/註冊後可看大圖

真係嘆為觀止 ，Billy兄我想問下你個kyosho 尾珠叉杯兩邊會唔會被狗骨整蝕？有無方法解決？

I am now using original plastic u-joints in all my cars. Unlike what many people think, they are actually very reliable and durable, provided that you know how to adjust and maintain your differential. Anything like gear differential, one-way or even tighter ball differential should be avoided.

[ 本帖最後由 billy86che 於 2009-2-23 23:00 編輯 ]

原帖由 billy86che 於 2009-2-22 23:15 發表

                               
登錄/註冊後可看大圖

I am now using original plastic u-joints in all my cars. Unlike what many people think, they are actually very reliable and durable, provided that you know how to adjust and maintain your differen ...

But if using original plastic u-joints, will it be less power transferred onto the wheels?

原帖由 scalpel 於 2009-2-22 23:23 發表

                               
登錄/註冊後可看大圖

But if using original plastic u-joints, will it be less power transferred onto the wheels?

It matters very little because of this small scale. Try it yourself to see if you can feel the difference.

[ 本帖最後由 billy86che 於 2009-2-23 13:39 編輯 ]

原帖由 billy86che 於 2009-2-22 23:30 發表

                               
登錄/註冊後可看大圖

It matters very little because of this small scale. Try it yourself if you can feel the difference.

Alright, thanks for your advice, I will have a go!

hi billy, I notice u are using the new Atomic tyres, so any comment on it?

原帖由 2slow 於 2009-2-22 23:49 發表

                               
登錄/註冊後可看大圖

hi billy, I notice u are using the new Atomic tyres, so any comment on it?

I tried 6 or 7 packs of battery at M?S only yesterday. 20 for front and 10 for rear. It was cool. I made a record of 10.1?? a lap. I had never been able to do that with a 86 previously when I was using other tyres.

[ 本帖最後由 billy86che 於 2009-2-22 23:55 編輯 ]

原帖由 billy86che 於 2009-2-22 23:54 發表

                               
登錄/註冊後可看大圖

I tried 6 or 7 packs of battery at M?S only yesterday. 20 for front and 10 for rear. It was cool. I made a record of 10.1?? a lap. I had never been able to do that with a 86 previously when I was  ...

Better grip than the normal ATM tires?

原帖由 scalpel 於 2009-2-23 00:01 發表

                               
登錄/註冊後可看大圖

Better grip than the normal ATM tires?

Yes. The V pattern 20 is better than the block threaded 20, while the v 10 better than the block threaded 10, in whichever running direction.

原帖由 billy86che 於 2009-2-22 23:54 發表

                               
登錄/註冊後可看大圖

I tried 6 or 7 packs of battery at M?S only yesterday. 20 for front and 10 for rear. It was cool. I made a record of 10.1?? a lap. I had never been able to do that with a 86 previously when I was  ...

Cool~ when are u going to M?S again... lets have some fun together~

anyway, how many packs of battery will it last..?