關於mr02 readysets的原裝縲絲問題

小弟購買了 mr 02readyset...
不過安裝時,發現 原裝送的縲絲不知道是不是太大 入不到...
有一個洞試過強硬轉入..不過不成功
我想問下是不是有問題?
師兄們曾經有無這個問題?

安裝什麼？天線嗎？

這個位..
螺絲入不到
天線果個位又係入唔到

You have to choose the right screws and as importantly, the right tools.

咁係唔係要去買...

Some MR02 come with more widely threaded screws. Using Kyosho option screws will make new threads in the screw holes, making it not lasting. It is better to keep using the original screws.

A good screw driver is necessary but never overtighten any screw. You have to 'look and feel carefully' when a screw has just gone into the hole completely.

不如你買包 Titanium 螺絲換曬佢, 或者你上車場問 d 師兄攞, 又或者你買個新車殼

原帖由 billy86che 於 2009-2-20 09:26 發表

                               
登錄/註冊後可看大圖

Some MR02 come with more widely threaded screws. Using Kyosho option screws will make new threads in the screw holes, making it not lasting. It is better to keep using the original screws.

A good s ...

但是轉入去果時好緊= =唔似可以入到去
如果買包新點同老闆講,同幾錢

[quote]原帖由 絕望路人 於 2009-2-20 09:50 發表

                               
登錄/註冊後可看大圖

但是轉入去果時好緊= =唔似可以入到去

Use your 'Force'.

原帖由 billy86che 於 2009-2-20 09:56 發表

                               
登錄/註冊後可看大圖

[quote]原帖由 絕望路人 於 2009-2-20 09:50 發表

                               
登錄/註冊後可看大圖

但是轉入去果時好緊= =唔似可以入到去

Use your 'Force'.

最後少少果到入唔到= =

Then either your screw is too long or there is plastic debris inside the screw holes. Use a needle to clear it.

[ 本帖最後由 billy86che 於 2009-2-20 10:11 編輯 ]

我知點解- -
原來個洞入面係無螺絲紋- -
多謝billy的建議

第一次總是比較痛...