RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

 找回密碼
 新玩家註冊
搜索
查看: 15953|回復: 32
打印 上一主題 下一主題
收起左側

DIY servo tester

[複製鏈接]
跳轉到指定樓層
1#
ice1234 發表於 2006-5-20 18:15:53 | 只看該作者 回帖獎勵 |倒序瀏覽 |閱讀模式

遊客登錄

您需要 登錄 才可以下載或查看,沒有帳號?新玩家註冊

x
大家又可以用十零蚊.....
得閒整返個離玩下.....test 下 d servo.....
有點點位置,d線先係通.....

[ 本帖最後由 ice1234 於 2007-6-25 21:15 編輯 ]
2#
 樓主| ice1234 發表於 2006-5-20 18:25:31 | 只看該作者
parts:

223 電容 x2
103 電容 x1
4.7k 電阻x1
1.1m 電阻x1
2.2k 電阻x1
120k 電阻x1
5k 可變電阻x1
2n3904 x2 (一般 npn type 三極管都可用) 
3 pin 針頭 x1
2 pin 針頭 x1 
3#
 樓主| ice1234 發表於 2006-5-20 18:28:33 | 只看該作者
4#
 樓主| ice1234 發表於 2006-5-20 18:38:06 | 只看該作者
5#
HondaStream 發表於 2006-5-20 19:00:32 | 只看該作者
Thanks for sharing... COOL @-)
6#
老人家 發表於 2006-5-20 19:09:42 | 只看該作者
ice1234 兄 : 值得表揚及請版主加至最頂
7#
 樓主| ice1234 發表於 2006-5-20 19:10:42 | 只看該作者
原帖由 老人家 於 2006-5-20 07:09 PM 發表
ice1234 兄 : 值得表揚及請版主加至最頂

8#
mugen 發表於 2006-9-7 16:46:40 | 只看該作者
your circuit had a problem, the NPN transistor E point may be need the connect somthing to
control the B point, if the E point direct connect to earth, the circuit may no work.

(if i wrong please correct)

[ 本帖最後由 mugen 於 2006-9-7 16:57 編輯 ]
9#
AMAT 發表於 2006-9-7 16:49:10 | 只看該作者
GOOD~!^_^
10#
 樓主| ice1234 發表於 2006-9-7 23:17:18 | 只看該作者
原帖由 mugen 於 2006-9-7 04:46 PM 發表
your circuit had a problem, the NPN transistor E point may be need the connect somthing to
control the B point, if the E point direct connect to earth, the circuit may no work.

(if i wrong plea ...

點解呀??????
11#
mugen 發表於 2006-9-8 09:22:11 | 只看該作者
If the E point direct connect to the earth, the circuit can't to provided the pluse and can't to control
the E point signal.

(if wrong please correct)
12#
 樓主| ice1234 發表於 2006-9-8 20:34:08 | 只看該作者
原帖由 mugen 於 2006-9-8 09:22 AM 發表
If the E point direct connect to the earth, the circuit can't to provided the pluse and can't to control
the E point signal.

(if wrong please correct)

有時間可以睇睇....

[ 本帖最後由 ice1234 於 2006-9-8 20:35 編輯 ]
13#
SPOONACCORD 發表於 2006-9-10 00:19:14 | 只看該作者
等你好news
14#
kachunsky 發表於 2007-2-12 11:01:19 | 只看該作者
我唔識整...
有無bro 幫我整...我比返錢你..加埋人工費..
15#
cad 發表於 2007-2-15 10:34:08 | 只看該作者
原帖由 ice1234 於 2006-5-20 18:15 發表
大家又可以用十零蚊.....
得閒整返個離玩下.....test 下 d servo.....
有點點位置,d線先係通.....


thank you very much.......
16#
Q太郎 發表於 2007-3-12 01:14:43 | 只看該作者
原帖由 老人家 於 2006-5-20 19:09 發表
ice1234 兄 : 值得表揚及請版主加至最頂

老人家及123兩位前輩,實在令人敬佩,無私地教後輩,有人發問唔會分堆或嫌新人搖控方面知讖少而不伸出瞹手,真正高手不是流。
17#
alexppo2002 發表於 2007-6-9 07:51:36 | 只看該作者
18#
fyin 發表於 2007-6-9 13:23:03 | 只看該作者
Hi Bro,
Thanks! Good stuff, I will try if Ok I will made 10 nos. circuit board.
any bro interest?
19#
rk2 發表於 2007-6-9 13:29:45 | 只看該作者
原帖由 fyin 於 2007-6-9 13:23 發表
Hi Bro,
Thanks! Good stuff, I will try if Ok I will made 10 nos. circuit board.
any bro interest?

你自已晒板 ? IF POSSIBLE I WANT ONE
20#
 樓主| ice1234 發表於 2007-6-9 16:07:29 | 只看該作者
原帖由 alexppo2002 於 2007-6-9 07:51 AM 發表



我想知道ic 8051 多D bor^^"~~~~XD唔知幾時可以睇睇呢?!

你想知 8051咩野??? :lol :lol
您需要登錄後才可以回帖 登錄 | 新玩家註冊

本版積分規則

手機版|小黑屋|RC EVOLUTION - 遙控工房

GMT+8, 2024-4-28 00:27 , Processed in 0.142188 second(s), 18 queries , Gzip On.

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回復 返回頂部 返回列表