NT-1 Clutch problem

Hello
My NT-1 (yellow clutch) revs to very high before the clutch even engage
and it almost has no low rec...
is it time for a new clutch or is it a setting problem?

Thanks!!!

do i need to take the whole clutch out and re-install?
i bought it used and re-assembled the whole car
i followed the manual and set the clutch bell to have some space(manual says 0.9mm but i couldnt measure)

does the 2-speed clutch have anything to do with this problem?
cos i might have let it too loose...

原帖由 stanley_wwy 於 2008-9-4 10:25 發表

                               
登錄/註冊後可看大圖

seems like you need to find a c hing close to you to help you set the clutch once and learn learn......

where do you live ar? see any c hing can help....

Thanks C Hing
went to study the menu and I think I understand the idea now
got a red clutch and some shim, the clutch bell space is minimized now(i think about 0.1mm..)
and i reseted the preload of the spring to about 2 turns and will start it there...
will test it this wekeend

and I want to know is the sound of Nova Turbo Engine different than usual engine?
because my engine seems to have a very high tone
but the compression is not bad( a bit hard to turn the flywheel with fingers)
is there a problem??