沙猪比較容易損壞是邊 PART 呀？

唉~~嗰日吾係好識用個電撻，不停係咁撻.....終放搞壞咗電撻入面粒單向。而家想換返個手拉好似好啲，一來可以就倒力同吾怕個電撻冇電。

仲有想問吓各師兄，沙猪比較容易損壞是邊 PART 呀？Thanks

[ 本帖最後由 天照 於 2006-2-14 12:27 編輯 ]

原帖由 rickyl215 於 2006-2-20 04:22 PM 發表
我之前果架就 idle 70-80℃ 幔走 90-100℃ 極速110-120℃,副机過120℃就開始立机,
過140℃就overheat！

but the 25 class engine is very easy to go to 90℃-100℃ if I put on the floor (no running) when I run-in the engine.  why gei?

我之前果架就 idle 70-80℃ 幔走 90-100℃ 極速110-120℃,副机過120℃就開始立机,
過140℃就overheat！

原帖由 WTO 於 2006-2-20 04:06 PM 發表

not exceed 100c

Thanks fo your reply.

原帖由 mark999hk 於 2006-2-20 16:02 發表


But how much for run-in ar? thanks

not exceed 100c

原帖由 WTO 於 2006-2-20 03:59 PM 發表
always keep it below 120c when after high speed running.

But how much for run-in ar? thanks

always keep it below 120c when after high speed running.

各位師兄，小弟有小小嘢請教。就是如果我 Run-in 我部沙猪 25 級 Engine (部沙猪放在地上不動的時候)，部機的理想温度是多少呀？ 及放在地上慢慢行的理想温度又是多少？ 當 Run - in 完成，它的機温的可以去到幾多而又不會 Over Heat 呢？ 謝謝

原帖由 moki 於 2006-2-16 08:32 PM 發表
Wai brother Mark, you see what I made!!??

You carzy guy.  But I love it~~

Wai brother Mark, you see what I made!!??

原帖由 WTO 於 2006-2-16 03:48 PM 發表

Buy from interent la.
http://www2.towerhobbies.com/cgi ... XDLN7&

Thanks, Mr. WTO.  I just got a 100% new 25class hand start and the oneway bearing this afternoon by 2nd hand.  It is only 200 for whole set.  But anyway, thx alot

原帖由 mark999hk 於 2006-2-16 14:17 發表


Only have 手拉$185-$190 instock, but no 單向 Bearing

Buy from interent la.
http://www2.towerhobbies.com/cgi ... mp;I=LXDLN7&P=7

原帖由 Skyline 於 2006-2-16 02:13 PM 發表



快摺有冇現貨？

Only have 手拉$185-$190 instock, but no 單向 Bearing

原帖由 mark999hk 於 2006-2-16 10:43 發表
大鑊~~昨天走出 KWS 找粒手拉/電撻的單向 Bearing，週街都冇貨。部沙猪又要 wait 才可以玩~~真係"頂"吖

快摺有冇現貨？

大鑊~~昨天走出 KWS 找粒手拉/電撻的單向 Bearing，週街都冇貨。部沙猪又要 wait 才可以玩~~真係"頂"吖

原帖由 mark999hk 於 2006-2-14 16:44 發表


Mr. Skyline, do you have Savage X?

Not yet brother, haven't seen in HK and is only available via U.S. websites that ship goods worldwide .... price is not bad at all ...  

大约3L左右,當然最正確要感覺下 sleeve同 piston仲緊唔緊.(已上只作參考)

原帖由 rickyl215 於 2006-2-14 04:53 PM 發表
因副机係我帮佢run架！

ok~~but how many "L" need to run in of this 25 class engine ka?  Thanks

因副机係我帮佢run架！

原帖由 rickyl215 於 2006-2-14 04:48 PM 發表
因副計只run in咗1L油左右,所以未完全run in好架！

Oh~~you are the guy who sell the Savage to me~~?