依段文對洛提到. caster angle 影響個camber . 配合得好. 會增加轉向(當兩個wheel turn 時會Both Tilt一齊斜,與地面接觸面增加.. 但太大的話因為個 斜太多,wheel turn 時會得條呔邊點地而令接獨面下降
(the greater the effective camber change when the wheels are turned. this happens because the tops of the wheels BOTH TILT towards the inside of ther corner. with the proper amount of caster this can increase steering, but if too much the tire only runs on the inside edge and loses its contact patch and grip.)
只看內文依一段呢..
0係一般0既情況下(generally), 細傾角(lower caster),直0的(more upright) 0係打滑,不平坦同唔咬0既地面會較好(better on slippery, inconsistent and rough surfaces)
而在大傾角(higher c ...
Looks like Serpent and XRAY menu are saying opposite things. I am confused too.