awd全車sas加低重心分享(中軸部份完成)(新圖在30樓)

thanks all guys, i love this kind of communication, it can give people ideas and know where the problem is.
1. sorry for the type mistakes. i know 老師 what you are talking about the central shaft. this problem has also been posted by other people  but after discussing, we have found a method to fix it.
2. yet i know that different part should use different materials....however this FRP version is just use for geometry purpose. Later some parts will change the material....it's all my fault that i don't have a cnc and i don't know how to use the computer to draw... by the way, do some 師兄can help me in this section?
3. i don't want to keep anypart out of the martket by i can't find a suitable part for my idea. Using 2 SAS from ATM OR EAGLE is really a brillant idea. However, idon't think that it can be suit into the front part. But anyway, I really love this idea.
4. that esc is just the cheapest esc to use brushless motor, i just want to try. i know sprectum 2.4G is trustworthy, but i think that the receiver can be changed from time to time to try which is the best.
5.about the central diff, one word again..."TRY". if nobody want to try and say it is not useful, i think this situation is not so good. Using the centraldiff as i communicate with miniz player in china, they have also made brushless in miniz and they found that the power is too much. After discussing,  we hope this idea can balance the power of the rear and front .
6. about the weight problem, this now is not over 100g and i believe that in the power of brushless, the weight is not a problem

[ 本帖最後由 deadmatch 於 2008-3-17 08:00 編輯 ]

I give up convincing you to stop but one day, one day you will understand why I'm saying all these here. Continue with your attempt then. Think of working only after you finish your public exam.

THX 老師, i will work hard for my public exams

btw, don't use so many nuts, juse 2mm king pins plus spacers.
u can consider overland, F1, monster, mr02 stainless king pins, they are all of different lengths.

if i am right (from longest to shortest)
Overland (chasis) > MR02 > F1 > Monster > Overland (steering)

i know that using king pin is really a good idea. 2mm is the best. however, even the shortest one in miniz, it is still too long for this diy, but king pin can be diy also^^ do any 師兄know where can find 2mm steel pin?