awd全車sas加低重心分享(中軸部份完成)(新圖在30樓)

很開心，給人精華了，謝謝各位支持

[ 本帖最後由 deadmatch 於 2008-2-22 23:23 編輯 ]

你個結構既設計都好厲害好複雜啊!加油,再次期待你完成車子後的後續試跑測試報告~

0054~係咩物料黎嫁~~鋼???

這是渡銀的纖維板，只是用作測試。成功後會用碳纖

成功左就用碳纖加利位L位正

考mock中.....做車應會較慢.....

不說太多.上圖先

感覺上好似好x闊咁

現在想搞中軸差速，但找不到小型的差速器，大家有什麼好提議？
原先我想著用雷速登的差速，貪佢夠細，但今天到店找也找不到雷速登....
有大大有嗎?

剛考完mock, 有點時間, 做好中軸和中置差速了..現上圖

希望各位師兄能多給意見.小弟還只是新手..

Suppose you finally can make it run and you go to any of the 2 indoor tracks, you will try a few packs of battery and you will go home and forget modifying it. Forgive me to tell you the reason: because you will understand that you are now wasting time.

why?老師請告訢我.

Some possible reasons for me to have commented that way:

1. No bearings are used for the F & R diff and the centre differential.
2. Centre shaft is not "One piece" and that will swing.
3. You abused the FRP and that will lead to too much clearance that makes the car difficult to control.
4. Nothing is based on a currently running car and you didn't do any geometry calculation and thus you wouldn't know how to make it run fast.
5. The speed control is still too big and you probably are not using a high grade 2.4 receiver. I have tried nearly all mini size FM receivers and none can allow any mini-z to run fast.
6. the centre diff is a burden instead of a blessing, trust me.

Any of the above makes your car run more slowly than a well set MR02, not to mention the AWD. (Except if you run it at home for fun and not competing with anybody.)

樓主, u are going too far la...

謝老師，
1. i will find ways to add bearings.
2. i don't think there wil be string...as every part are fixed
3. FRP this version is just for testing. LAter will use alloy
4. if everything is based on a running car, then what is the use of diy...?
5. the speed control maybe still too big ....but i think it is one of the most smallest esc for brushless ...
6. i really don't know whether it is burden...can you give me suggestions to imporve it.

we do DIY when we can't find similar parts in the market.
ATM and Eagle Racing now has SAS for the rear of the car which is similar to what u are doing.
so why not modify from available parts, maybe u can use two sets of SAS and Diy the chasis and centre transmissions.

anyway, just some crazy thoughts

These are what deadmatch misunderstood and I would like to clarify:

2. A fixed shaft like this will not be balanced and that will "SWING" (not string)
3. FRP or even C-FRP are not suitable for making "ALL" parts of a car. You should choose the most suitable material for different parts. (Some may be plastics, some metal and others C-FRP.)
4. I did not mean you should keep any parts from the market but without any running car, you can't know how fast your DIY is because there is no comparison.
5. I have no confidence in that ESC and the bigger problem is it makes you use a receiver and I haven't found anything on the market trustworthy except the 2.4G spectrum. Risk your money if you don't trust me.
6. A centre differential is useful on a real car but so far no one has found it useful on a 1/10 (either electric or nitro). You should be able to imagine how useless it will become when the scale is further reduced to 1/27.

[ 本帖最後由 billy86che 於 2008-3-17 00:20 編輯 ]

If this is for fun / experimental, then you've made a good toy for yourself.
But if u really think this can compete to a regularly well setted-up MR02 / AWD ( I mean in a track not a long straigth ), maybe ...............  

my opinion, not regarding any construction, geometry. The weight alone is already a big problem.

Not trying to offend, just my 2 cents.

But your effort and spirit is EXELLENT !!!

[ 本帖最後由 efour 於 2008-3-17 00:37 編輯 ]

all I can see are "nuts", anyway I praise your DIY spirit, keep it up