請問各位師兄savaga x轉向係用緊咩servo

原帖由 SunLi 於 2007-8-8 19:30 發表

                               
登錄/註冊後可看大圖

Could you send me some more informations about the servo safer of Savage....
I couldn't found out the forced limit of it in the instruction manual and HPI website....  thanks!!

Actually I don't have the "specs" of the servo saver =)

Simply use some springs and weight to test the servo saver hehe~
Or if you have a good sense of torque, use your fingers to test it  

My recommendation is to use the softest spring rate for servo saver,
especially if playing offroad.
Otherwise the servo can easily die in a matter of minutes under bad landings.

Some brothers like to set the servo saver to a stiffer setting,
and think it's more direct.
Well, it might be, but they have to pay the price of the servo  

[ 本帖最後由 BHP 於 2007-8-8 21:04 編輯 ]

原帖由 BHP 於 2007-8-8 21:01 發表

                               
登錄/註冊後可看大圖

Actually I don't have the "specs" of the servo saver =)

Simply use some springs and weight to test the servo saver hehe~
Or if you have a good sense of torque, use your fingers to test it   ...

   ....thanks!!

最後決定買左隻s9165 24kg 勁好轉向而家 先至係買$$740 勁低 買隻9351都$$750 咁都係決定買9165 個servo 外殼仲要係matel既添 勁低

係呀 勁低 又好力 又夠硬 因為佢係for air用 所以個servo殼係用metal做 so勁低 搞掂哂架車 今晚收工落做試水戰先 唔知原裝車起唔起到圍呢???

[ 本帖最後由 dio0222 於 2007-8-9 09:51 編輯 ]

speed 0.19...
Is your Savage X SS kit?

no 係savage x 個fd放比我的 但我唔要佢套控 我用番我架720套控 2車1接收  全新未落過地 engine都未著過 放比我2800 仲送多舊7.2v比roto start用 超低

[ 本帖最後由 dio0222 於 2007-8-9 12:53 編輯 ]

原帖由 dio0222 於 2007-8-9 12:52 發表

                               
登錄/註冊後可看大圖

no 係savage x 個fd放比我的 但我唔要佢套控 我用番我架720套控 2車1接收  全新未落過地 engine都未著過 放比我2800 仲送多舊7.2v比roto start用 超低

底喎! 我年幾前出沙XRTR要三仟幾...

我都有車友玩開沙豬有時間的話一齊放豬

香港無地方養豬; 豬農上曬大陛

好呀 不過比我熟架車先啦 熟左720要再下先知點control 沙豬