New Toy

登錄/註冊後可看大圖

師兄你的呔和令在那買...好像很正
by the way...個車架都好正

Brother,

How much of the 1/18 Novak brushness ESC set? By the way, please don't forget to buy a better suspension.

呔和令 is GRP DTM type line for 1:10 GVW06F , front 26Width, rear 30Width, 42Hardness
today test a while, seems good... but a little bit hard...
Next time, try a softer one...

1/18 Novak brushness ESC 8.5, 9000RPM/V, around 1000.-
just test, its linear performance excellent. Very fine control indeed.
using 12T pinion gear, ESC temp only 53deg cel., still well below factory stated 71-76deg.
will try 13T or 14T later

any recommendation for the oil suspension?

[ 本帖最後由 swswsw 於 2008-10-2 19:54 編輯 ]

C.hing..

Is that X-ray ? 好正 !!!

原帖由 swswsw 於 2008-10-2 19:49 發表

                               
登錄/註冊後可看大圖

呔和令 is GRP DTM type line for 1:10 GVW06F , front 26Width, rear 30Width, 42Hardness
today test a while, seems good... but a little bit hard...
Next time, try a softer one...

真係幾正, 幾錢le?

It is a well engineered products, tolerance of every parts are so little, fitting excellent..

Car Design, C.G. design... all are so excellent... so when I have a test run, it's feeling is so solid and precise.

Car Kit around 1600.- although price higher, but now found it do worth..

With the sensored brushless motor system, the acceleration is so fine.

喜歡。。不錯哦。。。呵呵

is it can't adjust the camber? (the car kit)

Camber.. cannot adjust...

原帖由 swswsw 於 2008-10-2 23:32 發表

                               
登錄/註冊後可看大圖

It is a well engineered products, tolerance of every parts are so little, fitting excellent..

Car Design, C.G. design... all are so excellent... so when I have a test run, it's feeling is so solid  ...

XRAY wor...
of cos la...