RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

 找回密碼
 新玩家註冊
搜索
查看: 938|回復: 0
打印 上一主題 下一主題
收起左側

Yokomo Parts Stocked!

[複製鏈接]
跳轉到指定樓層
1#
Dinballian 發表於 2013-6-3 15:57:10 | 只看該作者 回帖獎勵 |倒序瀏覽 |閱讀模式

遊客登錄

您需要 登錄 才可以下載或查看,沒有帳號?新玩家註冊

x
Yokomo 11.3mm Hex Rod End Balls S Size ZC-206SH

Rod end ball to be used in such as upper arm mounting portion. Hexagonal hole so attached to the tip of the ball, it is possible to turn an Allen wrench size 2mm. Please use the box wrench 5mm when turning the nut.
Item no.: ZC-206SH

Yokomo Front Steering Hub Carrier Caster 4 Degree for BD7 BD5 B7-413W

                               
登錄/註冊後可看大圖

These are Yokomo Front Steering Hub Carrier (Caster 4 Degree) for BD7 / BD5.
These are BD7 standard front steering hub carrier. Also can be used for BD5, a double universal joint shaft is used, it has been designed to avoid interference with the joint. Caster angle is 4 degrees.
Item no.: B7-413W

Yokomo Rear Wing Slide Window Set For HKS Racing Performer Toyota 86 SD-HK86W

                               
登錄/註冊後可看大圖

This is the HKS Racing Performer 86 Accessories Parts Set drift package series, the D1 version.
Item no.: SD-HK86W

Yokomo RC Pit Mat 600x900mm YT-YPM

                               
登錄/註冊後可看大圖

That lay on the table at the time of the pit stop, is a pit mat to prevent rolling of small parts, can be prevented as well as dirt. A synthetic leather to be worthy of such agents grip and cleaner, and it is with the finish with the high-quality Yokomorogo of embroidery is given. 900 × 600mm size of pit general.
Item no.: YT-YPM

Yokomo BD7 High Traction Graphite Upper Deck B7-003H

                               
登錄/註冊後可看大圖

Compared to the kit standard 2.0mm thick upper deck, this thinner version will help improve overall grip on low grip surfaces. However this upper deck can also be used to optimize chassis stiffness where speeds are regulated as in stock class racing, and even in high grip conditions.
Item no.: B7-003H
您需要登錄後才可以回帖 登錄 | 新玩家註冊

本版積分規則

手機版|小黑屋|RC EVOLUTION - 遙控工房

GMT+8, 2024-4-28 02:41 , Processed in 0.025428 second(s), 15 queries , Gzip On.

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回復 返回頂部 返回列表