ABC Gambado用乜野齒比好呢??

我用原裝...22齒摩打齒...
圍落4.9xx齒比...
10.5t無刷!!
慢過白豬m03好多....
我可唔可以擔到4.000齒比呢??
到時行到30齒...我怕裝唔到~~~

回復 kevin-ysl 的帖子

woo, heavy loading to your 10.5 motor. u can try the gear ratio starting from 6.8 or use the same gear ratio from that white pig m03 and test again. of course at the same track.

吓~~~gear ratio6.8???
咁咪重慢過慢爬??
再更正番原裝齒比先...係5.454~~真係同白豬差無幾呀~~~
我已經買左27t摩打齒...g.r.去到4.444...先前摩打冷冰冰~~
睇下改左之後會唔會發燒先~~~

回復 kevin-ysl 的帖子

no u are wrong. i am using 10.5 with gear ratio 7.0 in  sakura s in jv, it can faster than the 5.5.

gos 發表於 2011-11-26 17:07

                               
登錄/註冊後可看大圖

回復 kevin-ysl 的帖子

no u are wrong. i am using 10.5 with gear ratio 7.0 in  sakura s in jv, it ca ...

唉吔...師兄~~~原來你用SAKURA S~~~
我果架係M車GAMBADO喎...幾唔同嫁~~~
不過都好多謝你呢~~~

GOS兄...架車上手個師兄喜歡玩d5.5t左近嘅摩打...
所以佢個齒比都比較大...
今日試左...用4.444齒比~~快左好多...不過都比較慢...
同黑豬差不多...摩打輕微發熱!
不過HAPPY左兩排電甩野!!收皮...下次會試4.000齒比!
我個指標以摩打過熱發軟為上限!!

咁我用11.5T應該用咩齒比會快d呢~因為我裝唔到細齒（64p22/64p90)兩個齒接觸唔到

GOS兄...如果wc玩M05用黑豬...我會原裝大減配18摩打齒什至16....
因為直路唔長嗎~~

回復 kevin-ysl 的帖子

thanks for your information. i will take the driving test.