*Click the image to buy
The iMAX QUATTRO B6 Professional Balance Charger / Discharger has just restock @ rcMart.com
Tired of charging one battery at atime? Try iMAX Quattro B6! At last, a charger where you can charge 4Battery packs at the same time no matter what battery type you may have.
This charger allows you to plug 4 batteries into one chargersimultaneously, and it will intelligently and automatically charge all4 of them at once to their maximum capacity. To top of it, thebatteries being charged do not even need to have the sameconfiguration. You can connect differentchemistry（Ni-MH/Ni-CD/LiPo/LiFe）batteries into any of the chargingports. No more staying up late for charging batteries.
Specifications:
Input: DC 11 to 15V
Power source: 12V DC (car battery)/ AC mains PSU (>200Watts0
Charger power: 50Watts, current is regulated accordingly.
Discharger power: 5 watts, current is regulated accordingly
Cell count: 1-15 Nicd/NiMH cells; 1-6S LiPo/Lilon/LiFe cells; 1-10 Lead-Acide cells (2V to 20V)
Current drain for balancing Lithoum: 300mA
Charge termination: automatic, negative delta peak method for NiCd/NiMh; and automatic, voltage-dependent, CC-CV process
Dimensions: 225.4 x 158.6 x 62.4mm
Net weight: 1.09kg
High Performance Micro Processor
iMax Quattro B6 Pro Charger & Balancer is a rapid charger with a high performance microprocessor.
Individual Voltage Balancer
Quattro B6 has an individual-cell-voltage balancer inside. This doesnot require any extra balancer when charging Lithium batteries(Lilo/LiPo-LiFe) for cell voltage balancing
Suitable for various types of Lithium batteries
Quattro B6 can accept three types of Lithium batteries – Lilo, LiPo andLiFe. They have different characteristic by their chemistry. You canselect any one of them that you are going to process before the job.For their specifications, refer Warning and safety notes section.
Maximum safety
The automatic charge termination program works on the principle of theDelta-peak voltage detection. Auto-charge current limit: When chargingNiCd or NiMH at AUTO current mode, you can set the upper limit ofcharge current to avoid from high current charging.
Capacity Limit: If the charging capacity exceeds the limit the processwill be terminated automatically when you set the maximum value.
Processing time limit
You can also restrain the maximum process time to prevent from any possible defect.
Data store / load
For users convenience it can store 5 data of different batteries per charger (20 in total)
You can establish the data contains program setting of the battery to charge or discharge continually.
These data can be called out at any time you need and the process can be executed without program setting.
High-power and high-performance circuit
Quattro B6 employs the circuit that has maximum output power of 200W.As a result it can charge up to 15 cells NiCd / NiMH 6 cells lithiumwith max current of 5A and 8 series of Lithium batteries with maximumcurrent of 7.0A. Furthermore the cooling system is so efficient thatcan hold such a power without any trouble of running the CPU or theoperating program.
Optimized User Interface
Quattro B6 has an AUTO function that sets the feeding currentautomatically. It can prevent the over-charging. Program in the unitare controlled with mutual links and communication for every possibleerror for maximum safety.
Balancing individual cells battery discharging
Quattro B6 also can monitor and balance individual cells of the Lithiumbattery pack during the discharge process. If the voltage of any onecell varies abnormally, the process will be stopped with the errormessage.
Lithium battery Fast and Storage mode
You can charge Lithium battery for special purpose. Fast charge reducesthe charging time of Lithium battery and Storage mode controls thefinal voltage of the battery to be suit for long time storage.
Temperature threshold (Optional)
The temperature of the battery on charging will be rise by its internalchemical reaction. If you set the limit of temperature the process willbe expired forcibly when the limit has reached.
Input power monitoring
To protect the car battery using as input power from being damaged thevoltage of it always monitored. If it drops below the lower limit theprocess will be ended automatically.
Cyclic charging / discharging
Perform 1 to 5 cycles of charge / discharge or discharge / charge continually for battery refreshing and balancing.
Includes:
1 x charger
1 x pair alligator clips for Pb battery
1 x alligator to bullet connector cable
1 x JST to bullet connector cable
1 x Futaba to bullet connector cable
1 x Tamiya to bullet connector cable
1 x bullet connector with wire
1 x TP/FP adaptor
1 x XH adaptor
1 x instruction manual
Where to buy?
http://www.rcmart.com/catalog/rc-charger-liponimhnicd-imax-skb6m0c100-quattro-balance-chargerdischarger-four-independent-outp-p-30354.html
IMAX (#SK-SW00P100) Software Kit
Where to buy:
http://www.rcmart.com/catalog/rc-connection-imax-sksw00p100-software-p-30739.html?cPath=52_1433
Source: iMAX |
收藏
勁正
嬲嬲