TA-04s 尾直sub, does it available?

As the topic,  I tried to put hot glue inside the rear diff, it only last for few runs, because the hardened glue just smashed and the diff can run again but not smooth (due to the hardened glue still inside).
Just wondering is any straight spool (直sub) available in the market, or use some other model 直sub? example like TT-01 or TA-05. Any C-hing have experiance about it?
Also I have a front 1-way unit for TA-04 but not install yet, just wondering if I use front 1-way still need rear 尾直sub?

Hope C-hings can give any input for above silly questions.

Thanks

What's wrong with my post? no one like it? or no one know it?

What's wrong with my post? no one like it? or no one know it?

Ching你不如試下寫／打中文啦
睇下其它ching幫唔幫倒你

網上翻譯

作為主題，我試圖把熱膠內差異的後方，只持續數運行，因為剛剛打破硬化膠和差異可以再次運行，但並不順利（由於長期形成的膠仍在裡面）。
只是想知道是任何直線軸（直分），可以在本地市場，或者使用其他的模式直子？例如像特- 01或電訊- 05。任何C興都experiance什麼呢？
此外，我前面有一個1路的單位達04，但暫時還不能安裝，只是想知道如果我使用的前1路仍然需要後方尾直子？

希望ç - hings可以給任何輸入以上無聊的問題。

謝謝

你打咁多野其實就係想問, TA04有無自家改裝"直shaft"啫. 買個TA04金屬珠差杯,唔好裝大珠就可以啦.

Ching你不如試下寫／打中文啦
睇下其它ching幫唔幫倒你
ArmyAnt 發表於 2009-10-25 12:37

                               
登錄/註冊後可看大圖

Sorry mate, I can't type chinese character, also my chinese is quite bad. Reading still ok...

網上翻譯

作為主題，我試圖把熱膠內差異的後方，只持續數運行，因為剛剛打破硬化膠和差異可以再次運行，但並不順利（由於長期形成的膠仍在裡面）。
只是想知道是任何直線軸（直分），可以在本地市場，或者使用其 ...
BENNY_謙 發表於 2009-10-25 15:04

                               
登錄/註冊後可看大圖

Thank this C-hing, but the translation seems too far away from my meaning. I knew this translation service on google, I found it is not that reliable...

你打咁多野其實就係想問, TA04有無自家改裝"直shaft"啫. 買個TA04金屬珠差杯,唔好裝大珠就可以啦.
loman 發表於 2009-10-25 15:45

                               
登錄/註冊後可看大圖

TA-04 ball diff? I don't any stock in any model shop, think about TA-04 is a pretty old model...