RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

 找回密碼
 新玩家註冊
搜索
查看: 7324|回復: 36
打印 上一主題 下一主題
收起左側

1/16 FLAKPANZER GEPARD

[複製鏈接]
跳轉到指定樓層
1#
tommy1218 發表於 2006-6-8 18:18:09 | 只看該作者 回帖獎勵 |倒序瀏覽 |閱讀模式

遊客登錄

您需要 登錄 才可以下載或查看,沒有帳號?新玩家註冊

x
近來想收藏返一D懷舊RC,昨天走去深水涉電X模型,睇下,冇野買!走過對面的模型店,專賣坦克及船,無意比我發現.......................
2#
 樓主| tommy1218 發表於 2006-6-8 18:25:25 | 只看該作者
原帖由 tommy1218 於 2006-6-8 18:18 發表
近來想收藏返一D懷舊RC,昨天走去深水涉電X模型,睇下,冇野買!走過對面的模型店,專賣坦克及船,無意比我發現.......................

結果考慮唔夠5分鐘,就決定搬佢返屋企
3#
EricRC 發表於 2006-6-8 18:44:01 | 只看該作者
嘩  超 正 how much ar?
4#
 樓主| tommy1218 發表於 2006-6-8 21:06:07 | 只看該作者
原帖由 EricRC 於 2006-6-8 18:44 發表
嘩  超 正 how much ar?

$2xxx
5#
speedstar 發表於 2006-6-9 01:05:04 | 只看該作者
原帖由 tommy1218 於 2006-6-8 21:06 發表

$2xxx


OK la....there was a NIB selling at KWS months ago..asking $4800
6#
 樓主| tommy1218 發表於 2006-6-9 09:29:20 | 只看該作者
原帖由 speedstar 於 2006-6-9 01:05 發表


OK la....there was a NIB selling at KWS months ago..asking $4800

我都見過,KWS生X店,我問過佢,佢話係寄賣,鐵價不二!
7#
python 發表於 2006-6-9 12:55:02 | 只看該作者
I also buy a Leopard 1 there, I also ask their "see fuu" to modify my tank's wheels, because the original plastic plug cannot aford the road feed back, some of them were cracked.
8#
 樓主| tommy1218 發表於 2006-6-9 21:10:22 | 只看該作者
原帖由 python 於 2006-6-9 12:55 發表
I also buy a Leopard 1 there, I also ask their "see fuu" to modify my tank's wheels, because the original plastic plug cannot aford the road feed back, some of them were cracked.

買左幾耐?幾錢?
9#
python 發表於 2006-6-9 21:15:19 | 只看該作者
at least 4 yrs lar.
10#
 樓主| tommy1218 發表於 2006-6-9 23:25:28 | 只看該作者
原帖由 python 於 2006-6-9 21:15 發表
at least 4 yrs lar.

keep in good look!
11#
python 發表於 2006-6-10 00:14:26 | 只看該作者
coz i seldom run it, i heard the metal gear is too soft of leopard 1 a4, so, i used to run it slow slowly.
12#
speedstar 發表於 2006-6-10 00:22:38 | 只看該作者
原帖由 tommy1218 於 2006-6-9 09:29 發表

我都見過,KWS生X店,我問過佢,佢話係寄賣,鐵價不二!


其實個價都算合理...所以好快去左貨
13#
zls 發表於 2006-6-19 01:15:36 | 只看該作者
楼主兄弟!看到你的工作台真的是多家伙呀!拆得好多车!
你有玩攀爬车吗!我系大陆珠海人!!刚注册!以后多多关照!
14#
 樓主| tommy1218 發表於 2006-6-30 15:43:58 | 只看該作者
原帖由 zls 於 2006-6-19 01:15 發表
楼主兄弟!看到你的工作台真的是多家伙呀!拆得好多车!
你有玩攀爬车吗!我系大陆珠海人!!刚注册!以后多多关照!

咁又唔使咁客氣,都係大家研究下啦!一山還有一山高,呢度仲有好多高手!
15#
ice1234 發表於 2006-6-30 15:46:01 | 只看該作者
我都有ga 1/16 FLAKPANZER GEPARD ,不過個頂 難難地...
16#
 樓主| tommy1218 發表於 2006-6-30 15:48:00 | 只看該作者
原帖由 ice1234 於 2006-6-30 15:46 發表
我都有ga 1/16 FLAKPANZER GEPARD ,不過個頂 難難地...

post上來睇下!
17#
ice1234 發表於 2006-6-30 16:23:14 | 只看該作者
原帖由 tommy1218 於 2006-6-30 03:48 PM 發表

post上來睇下!


車頭個鉤改左鋁,個蓋都係(銀色).

[ 本帖最後由 ice1234 於 2006-6-30 16:51 編輯 ]
18#
ice1234 發表於 2006-6-30 16:28:54 | 只看該作者
份尾自己改左做鋁板.......側邊都用鋁板圍左,用離防沙.

[ 本帖最後由 ice1234 於 2006-6-30 16:31 編輯 ]
19#
 樓主| tommy1218 發表於 2006-6-30 23:25:57 | 只看該作者
會唔會改用電變?
20#
python 發表於 2006-7-6 08:57:41 | 只看該作者
It is suggested to use ESC, so, the clutch would have less loading when starting to move. Always use low speen when start, speed up the tank slowly. it is the way to run a vintage tamiya twin clutch tank.
您需要登錄後才可以回帖 登錄 | 新玩家註冊

本版積分規則

手機版|小黑屋|RC EVOLUTION - 遙控工房

GMT+8, 2024-4-29 00:00 , Processed in 0.117864 second(s), 18 queries , Gzip On.

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回復 返回頂部 返回列表