(1) Open the engine rear cover, use a cotton web to absorb all excess oil / lub
(2) Replace all tubings (fuel supply, back pressure)
(3) Replace a new hot plug (Novarossi no.5)
(4) return the high speed needle a little bit
(5) make sure the carb slide at correct position at idle
(6) make sure the plug battery have power
l
l
l
pump the fuel in and start the engine, if cannot start this time, you have to disassemble the engine to have a detail check.... otherwise, just dump it and buy a new one.
原帖由 Motorman 於 2006-8-26 03:51 發表
(1) Open the engine rear cover, use a cotton web to absorb all excess oil / lub
(2) Replace all tubings (fuel supply, back pressure)
(3) Replace a new hot plug (Novarossi no.5)
(4) return the h ...